Cut Sheet

ELECTRICAL ACCESSORIES Lighting Packages
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEACCESSORIES5
Spec-00581 N
LED LIGHT KIT
LED light kits provide interior enclosure lighting. These light kits
are ideal for remote and darkened enclosure applications. The light
can be mechanically fastened with included hardware to maintain
enclosure UL listing (up to Type 4X), or can be magnetically attached
to flat steel surfaces. The lights have auto-sensing circuitry (AC
voltage 90 VAC to 265 VAC and DC voltage 20 VDC to 60 VDC). LED
lights are light-weight and in a small form factor while providing
400 LM of 6000-7000K light. Power consumption for all models is 5
watts.
Bulletin: A80lt












0DJQHW
0RXQW




0DJQHW
0RXQW
6FUHZ
0RXQW




2Q2II6ZLWFK/LJKW
0RWLRQ6HQVRU/LJKW

6FUHZ
0RXQW
Catalog Number
AxBxC in./mm Weight (oz) Weight (gm)
Mounting
Style Power Source Activation
Voltage
LEDA1M35 1.34 x 1.26 x 13.82
34 x 32 x 351
4.8 135 Magnetic AC On/off switch 90 VAC-265 VAC
LEDA2M35 1.54 x 1.26 x 13.82
39 x 32 x 351
5.0 140 Magnetic AC IR Motion Sensor 90 VAC-265 VAC
LEDA1S35 1.42 x 2.05 x 13.82
36 x 52 x 351
4.8 135 Screw AC On/off switch 90 VAC-265 VAC
LEDA2S35 1.63 x 2.05 x 13.82
41 x 52 x 351
5.0 140 Screw AC IR Motion Sensor 90 VAC-265 VAC
LEDD1M35 1.34 x 1.26 x 13.82
34 x 32 x 351
4.8 135 Magnetic DC On/off switch 20 VDC-60 VDC
LEDD2M35 1.54 x 1.26 x 13.82
39 x 32 x 351
5.0 140 Magnetic DC IR Motion Sensor 20 VDC-60 VDC
LEDD1S35 1.42 x 2.05 x 13.82
36 x 52 x 351
4.8 135 Screw DC On/off switch 20 VDC-60 VDC
LEDD2S35 1.63 x 2.05 x 13.82
41 x 52 x 351
5.0 140 Screw DC IR Motion Sensor 20 VDC-60 VDC
LED LIGHT INPUT CONNECTOR/CABLE ASSEMBLY
The input connector/cable assembly is used to provide supply
power to the LED light. Preassembled connector/cable assembly
with 78.7-in. (2000 mm) long cable whip. Cables are constructed of
16 AWG copper wire.
Bulletin: A80lt
Catalog Number
A in./mm Power Source
Use with
LEDA20C 78.74
2000
AC AC LED Lights
LEDD20C 78.74
2000
DC DC LED Lights
LED LIGHT EXTENSION CONNECTOR/CABLE ASSEMBLY
The extension connector/cable assembly is used to connect
adjacent LED lights (daisy chain). Up to 10 LED lights can be ganged
or connected in series. Pre-assembled connector/cable assembly
with 39.4-in. (1000 mm) long cable between input and output
connectors. Cables are constructed of 16 AWG copper wire.
Bulletin: A80lt
Catalog Number
A in./mm Power Source
Use with
LEDA10E 39.37
1000
AC AC LED Lights
LEDD10E 39.37
1000
DC DC LED Lights