Cut Sheet

CABLE PATHWAY Cable Runway and aCCessoRies
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICENETWORKING11
Spec-00069 V
RUNWAY CENTER SUPPORT KIT
Threaded rod and bracket supports
center of ladder rack from ceiling.
Kit includes heavy-duty ladder
rack cross member, two mounting
brackets, two #12-24 screws, 5/8-in.
threaded rod, protected sleeve and
four 5/8-in. nuts. Use one kit at least
every 5 ft. (1.5 m). Made of plated
steel.
BULLETIN: DCR
Catalog Number
Finish
Fits Cable
Runway
Kit Qty.
LCSK6 Plated 6 1
LCSK12 Plated 12 1
LCSK18 Plated 18 1
LCSK24 Plated 24 1
SPOOL DIVIDER KIT
Spools separate cables to improve
cable management and to control
cable-to-cable distances. Spool
and bracket attach to ladder
rack cross member and can be
located anywhere across the
width. Kit includes ten 4-in.-tall
spools, brackets and all necessary
hardware. Spool made of black
plastic and bracket made of plated
steel.
BULLETIN: DCR
Catalog Number
Finish
Kit Includes
LCRDSK Black plastic spool;
plated steel bracket
10 spools,
10 brackets and
mounting hardware
INSULATED GROUND JUMPER KIT
Fastens across splices to provide
a secure ground between sections
of ladder rack. Made of #6
AWG x 7 strand wire with green
THW insulation and two-hole
compression lugs mounted on each
end. Includes fasteners.
BULLETIN: DBG
Catalog Number
Conductor Type
L
in./mm
DGJ #6-7 Stranded 12.00
305
cULus requires 2 kits per splice on all painted ladder sections