Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresShelf, Adjustable Depth

SHELVES, KEYBOARD TRAYS AND GLAND PLATES Folding ShelveS

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEACCESSORIES1

Spec-00035 U

STAINLESS STEEL FOLDING SHELF

Supports instruments and test equipment used to install and

maintain electrical components in an enclosure. Also ideally

suited for supporting laptop computers, monitoring units and other

equipment used with programmable controllers. The shelf can be

installed on the inside or outside surface of larger nVent HOFFMAN

industrial enclosures (except ProLine). Automatically locks in the

horizontal position when raised. When not in use, the shelf folds

down and projects only 1 in. (25 mm) from the mounting surface.

Constructed of 304 stainless steel with a brushed nish. Maintains

UL/CSA Type 4, 4X and 12 rating when properly installed on an

nVent HOFFMAN enclosure.

Bulletin: A80

Catalog Number

Size AxB

in./mm

Maximum

Distributed

Load Rating (lb.)

Maximum

Distributed

Load Rating (kg)

ACSHelF1212SS 12.00 x 12.00

305 x 305

150 68

ACSHelF1818SS 18.00 x 18.00

457 x 457

150 68

ACSHelF2424SS 24.00 x 24.00

610 x 610

150 68

LARGE FOLDING SHELF

Supports instruments and test equipment used to install and

maintain electrical components in an enclosure. Also ideally

suited for supporting laptop computers, monitoring units and other

equipment used with programmable controllers. The shelf can be

installed on the inside or outside surface of larger nVent HOFFMAN

industrial enclosures (except ProLine). Automatically locks in the

horizontal position when raised. When not in use, the shelf folds

to 1.73 in. (44 mm) from the mounting surface. All parts are heavy

gauge steel. Maintains UL/CSA Type 4 and 12 when properly intalled

on an nVent HOFFMAN enclosure.

Catalog Number

Size AxB

in./mm

Maximum

Distributed

Load Rating (lb.)

Maximum

Distributed

Load Rating (kg)

Finish

AASHlF1218 18.00 x 12.00

457 x 305

150 68 White

AA61SHlF1218 18.00 x 12.00

457 x 305

150 68 Gray

AA35SHlF1218 18.00 x 12.00

457 x 305

150 68 Light gray

AASHlF1818 18.00 x 18.00

457 x 457

150 68 White

AA61SHlF1818 18.00 x 18.00

457 x 457

150 68 Gray

AA35SHlF1818 18.00 x 18.00

457 x 457

150 68 Light gray

AASHlF2424 24.00 x 24.00

610 x 610

150 68 White

AA61SHlF2424 24.00 x 24.00

610 x 610

150 68 Gray

AA35SHlF2424 24.00 x 24.00

610 x 610

150 68 Light gray

Summary of content (10 pages)

PAGE 1
Shelves, Keyboard Trays and Gland Plates Folding Shelves Stainless Steel Folding Shelf Bulletin: A80 Catalog Number ACSHELF1212SS ACSHELF1818SS ACSHELF2424SS Size AxB in./mm 12.00 x 12.00 305 x 305 18.00 x 18.00 457 x 457 24.00 x 24.00 610 x 610 Maximum Distributed Load Rating (lb.) 150 Maximum Distributed Load Rating (kg) 68 150 68 150 68 Supports instruments and test equipment used to install and maintain electrical components in an enclosure.
PAGE 2
Shelves, Keyboard Trays and Gland Plates Shelves for Open Frame Racks Double-Sided Solid Aluminum Shelf Mounts on 19-in. open frame rack. Two shelves form double-sided shelf. Uses 4U rack space. Made of 0.090-in. thick aluminum with brushed finish. Maximum load rating: 100 lb. (45.4 kg) per side, 200 lb. (90.7 kg) total Bulletin: DACCY Catalog Number ESHDA19 HxWxD in./mm 5.62 x 19.31 x 9.37 143 x 490 x 238 Fits Rack 19 in.
PAGE 3
Shelves, Keyboard Trays and Gland Plates Shelves for Open Frame Racks Single-Sided Steel Vented Shelf Vented shelf mounts to either front or rear flange of open-frame rack. Steel with textured black polyester powder paint finish. Load rating: 150 lb. (68.0 kg) Bulletin: DACCY Catalog Number ESH19V ESH23V HxWxD in./mm 4.85 x 19.00 x 10.50 123 x 483 x 267 4.85 x 23.00 x 10.50 123 x 584 x 267 Fits Rack 19 in. Rack Units 3 23 in.
PAGE 4
Shelves, Keyboard Trays and Gland Plates Shelves for Open Frame Racks Rack-Mount Steel Shelf 19-in. Rack-Mount Shelf mounts to the front of the rack. Ideal for holding non-19-in. rack-mount equipment. Available with or without vents. Manufactured from 16 gauge steel. Black, low-gloss, lightlytextured finish on all surfaces. Load rating: 100 lb. (45.4 kg) Bulletin: DOFRC Catalog Number EMS1918 EMS1922 EMSV1918 EMSV1922 HxWxD in./mm 5.25 x 19.00 x 18.00 133 x 483 x 457 5.25 x 19.00 x 22.
PAGE 5
Shelves, Keyboard Trays and Gland Plates Shelves for Racks and Cabinets Pivoting Keyboard Shelf with Mouse Tray Mounts either in a cabinet or on a 19-in. open-frame rack. Shelf pulls out and pivots 90 degrees to access full-size keyboard. Shelf allows keyboard to slide between standard rack angles and includes mouse tray. 16 gauge steel with RAL 9005 black polyester powder paint finish. Keyboard tray extends 9.75 in. (248 mm) beyond front of rack angles or open-frame rack.
PAGE 6
Shelves, Keyboard Trays and Gland Plates Shelves for Racks and Cabinets Rack-Mount Adjustable Shelf Mounts to front surface of front and back rack angles. Shelf is made of painted 14 gauge steel and the adjustable support brackets are clear-plated 12 gauge steel. Adjustable to fit multiple-depth enclosures or rack angle placement. Both solid and vented models available. Fits 19- or 23-in. rack spacing. Requires only 1U of rack space.
PAGE 7
Shelves, Keyboard Trays and Gland Plates Shelves for Racks and Cabinets Rack-Mount Sliding Shelf Rack-Mount Sliding Shelf mounts to front surface of front and back rack angles. Models fit 19- or 23-in. rack spacing. Adjusts to fit multiple-depth enclosures and rack angle placements. Shelf can be used on 2-post rack or cabinet with front rack angles only by reversing support bracket. Optional cable manager arm available.
PAGE 8
Shelves, Keyboard Trays and Gland Plates Shelves for Racks and Cabinets Rack-Angle Mounted Drawer Catalog Number P19DR1US P19DR2US P19DR3US H (mm) 43 88 132 H (in.) 1.69 3.47 5.20 Catalog Number P19WS Description Steel writing surface and cover Fits Rack Width 19 in. 19 in. 19 in. Rack Units 1 2 3 Steel drawer for 19-in. rack-angle mounting. Mounts to the front surface of the rack angles. Integral steel box contains the drawer and protects surrounding internal equipment. Extends 13 in.
PAGE 9
Shelves, Keyboard Trays and Gland Plates Shelves for Racks and Cabinets Concept Keyboard Box Keyboard box is designed to fit on an outside surface of an enclosure to provide a self-contained external Type 4 housing for a keyboard. The box attaches to the enclosure surface with 4 bolts. A large hole and rubber plug are provided for keyboard cord and plug. The hinged cover is supported with flexible cables in the open position.
PAGE 10
Shelves, Keyboard Trays and Gland Plates Gland Plates 12 Gauge Gland Plate, Type 4 and Type 12 : + Mild steel gland plates are constructed of 12 gauge steel and finished with ANSI 61 gray polyester powder paint. Gland plates provide a removable cable egress and entry plate while maintaining enclosure rating of UL Type 4 and Type 12. Easy installation by cutting a rectangular opening in the enclosure and fastening with included hardware kit.