Cut Sheet

PROLINE G2 INTERNAL COMPONENTS Panels and accessories
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEMODULAR ENCLOSURE SOLUTIONS5
Spec-01198 D
EZLOAD GLIDE BLOCKS
APPLICATION
A complete set of PROLINE G2 EZ-Load Glide Blocks is included
with every PROLINE G2 Full Mounting Subpanel and PROLINE G2
Industrial Packages. This set of four additional blocks can be used
if a replacement set is needed.
FEATURES
•
Can be used to load a subpanel vertically from the front, rear or
side.
•
Can be used to load a subpanel while it is horizontal (i.e. on a
table).
•
Ensures subpanel is securely bolted to the frame in all four
corners.
SPECIFICATIONS
• For vertical front loading, the front glide blocks use the frame
rails as a guide. Shaped to fit over the frame rails, the glide
blocks ensure the subpanel inserts smoothly and easily into the
desired location within the enclosure.
• The rear glide blocks can be attached to the enclosure prior to
the subpanel insertion, so the end position of the subpanel can
easily and accurately predetermined.
• For horizontal loading, the frame can be lowered over the
mounting subpanel . In this configuration the load of the
subpanel is in a safe, static state. The EZ-Load Glide Blocks can
then be easily fastened to the frame and subpanel.
• If the subpanel is used in the rearmost position, the rear glide
blocks will not be used.
• If two subpanels are used in the enclosure in a back-to-back
position the rear glide blocks will not be used.
• Made from a high performing glass re-enforced polymer
• Attaches to the frame using BV-M6 fasteners; attaches to the
subpanel using hex bolts.
• Mounting hardware included
Bulletin: p40
Catalog Number
Description
Pkg. Qty.
P2AGBHK EZ-LOAD Glide Blocks 4