Cut Sheet

PROLINE G2 ExtERNaL COmPONENts Base accessories
PH 763.422.2211nVent.com/HOFFMAN mOduLaR ENCLOsuRE sOLutIONs 4
Spec-01131 H
VENtEd PLINth BasE COVERs
The Vented Plinth Base Covers replace the traditional solid plinth
base covers that mount width-wise across the front and rear of
the enclosure. Vented covers allow air to enter the enclosure from
below, and are used in conjunction with the Vented Gland Plate.
These covers are RAL 9005 black, polyester powder paint, and
include all necessary mounting hardware.
Please note that a standard 100mm Solid Plinth Base must be
ordered separately, as Vented Plinth Base Covers are replacements
for the front and rear covers only. Vented Gland Plate also sold
separately, but required for successful air passage.
Bulletin: P40
Standard Product 
Catalog Number
Fits Frame Type
Fits Frame Width - mm
P2APBVC6 Single-Bay 600
P2APBVC8 Single-Bay 800
P2APBVC10 Single-Bay 1000
P2APBVC12 Double-Bay 1200
P2APBVC16 Double-Bay 1600
P2APBVC18 Double-Bay 1800
PLINth BasE mOuNtING BRaCkEt kIt
The Plinth Base Mounting Bracket Kit secures to the cast aluminum
corner blocks of the standard Plinth Base. The bracket kit serves
twofunctions:therstfunctionistofacilitateoormounting,
and the second is to run a grid network for cable management.
Previously,itwaschallengingtosecureanenclosuretotheoor,but
with the bracket kit the mounting holes are now easily accessible
from inside the cabinet after gland plate removal. Grid straps can
also now be mounted to the Plinth Base Mounting Bracket Kit to
secure cables entering or leaving the cabinet through the base.
Grid Straps and Plinth Base are sold separately. The brackets are
constructedfroma10-gauge(3.0mm)steel,andnishedinRAL
9005, matte black.
Bulletin: P40
Standard Product 
Catalog Number
Description
Package Quantity
P2APBMBK Plinth Base Mounting Bracket Kit 4
PLINth BasE staCkING kIt
The Plinth Base Stacking Kit is used to stack plinth bases up to 400
mm high. Kit consists of eight bolts and nuts and eight each of two
types of washers.
Bulletin: P20
Catalog Number Description
PPBSK Plinth Base Stacking Kit