Cut Sheet

PROLINE ExtERNaL COmPONENts PROLINE TOPs aNd BasEs
PH 763.422.2211nVent.com/HOFFMAN mOduLaR ENCLOsuRE systEms 6
Spec-00429 L
vENtEd PLINth BasE COvERs
Vented Plinth Base Covers install in the front and rear openings
of a standard plinth base in place of Solid Covers. Vented covers
allow air to circulate into the enclosure. Vented Plinth Base Covers
are available in 100-mm and 200-mm heights. These covers are
nished with RAL 9005 black polyester powder paint and include all
necessary mounting hardware.
A standard plinth base must be ordered in combination with Vented
Plinth Base covers to form a Vented Plinth Base. If using a gland
plate with the Vented Plinth Base, order a vented gland plate to
provide air circulation through the bottom of the enclosure.
Bulletin: P20
100-mm Vented Plinth Base Covers
Catalog Number
Fits Frame Type Fits Frame (B dimension)
W
mm/in.
PPBCV1600 Single-Bay 600 599
23.58
PPBCV1700 Single-Bay 700 699
27.52
PPBCV1800 Single-Bay 800 799
31.46
PPBCV11000 Single-Bay 1000 999
39.33
PPBCV11200 Double-Bay 1200 1199
47.20
PPBCV11600 Double-Bay 1600 1599
62.95
200-mm Vented Plinth Base Covers
Catalog Number
Fits Frame Type Fits Frame (B dimension)
W
mm/in.
PPBCV2600 Single-Bay 600 599
23.58
PPBCV2700 Single-Bay 700 699
27.52
PPBCV2800 Single-Bay 800 799
31.46
PPBCV21000 Single-Bay 1000 999
39.33
PPBCV21600 Double-Bay 1600 1599
62.95
REPLaCEmENt FILtER kIt FOR FILtEREd gLaNd
PLatE
Kit includes 12 disposable two-ply polyester replacement lters for
ltered gland plates. Two lters are required for double-bay frames.
Bulletin: P20
Catalog Number
Filter Size
mm/in.
Fits Frame B x C
PFK4012 406 x 127
16.00 x 5.00
600 x 400
PFK6020 609 x 203
24.00 x 8.00
800 x 500, 800 x 600, 800 x 800, 800 x 900,
1600 x 500, 1600 x 600, 1600 x 800
PFK8120 813 x 203
32.00 x 8.00
1000 x 500, 1000 x 600, 1000 x 800
gLaNd PLatEs
Adjustable Gland Plates are used to seal the bottom of the PROLINE
frame. Solid, vented and shielded Gland Plates are available.
Solid and ltered gland plates include covers that are gasketed
to maintain Type 12 enclosure requirements. Gland plates are 16
gauge steel and are nished with RAL 7035 textured light-gray
polyester powder paint. EMC Gland Plates are nished with paint
over plated surfaces. All installation hardware is included.
Solid Gland Plate and EMC Gland Plate are accessories to 100-
mm Solid Base, 100-mm/200-mm Plinth Base, Mobile Base and
Transportation Base. These gland plates can be used without a
base if casters, levelers or frame feet are installed. EMC Gland Plate
maintains a Type 1 rating.
Solid Gland Plate
The Solid Gland Plate can be used with all PROLINE subpanels or
rack angles. The gland plate consists of a base mounting surface
and two adjustable foam-gasketed plates that permit cable entry.
The plate can be rotated 180 degrees for front or rear cable entry.
Filtered (Vented) Gland Plate
Filtered Gland Plate is used only in conjunction with Vented Plinth
Base Covers. The plate can be used with all PROLINE subpanels
or rack angles. It consists of a mounting base, three adjustable
plates for cable entry, a lter and lter retaining rails. Manufactured
from 16 gauge steel and nished with RAL 7035 textured light-gray
polyester powder paint. Replacement lters available.
EMC Gland Plate
This gland plate can be used with subpanels or rack angles. Gland
plate consists of a base mounting surface and two adjustable gland
plates (both have a conductive coating) with conductive fabric-over-
foam gasket for cable entry.
Bulletin: P20