Cut Sheet

FREE-STAND CABINETS PROLINE SERvER CabINEtS
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICENETWORKING1
Spec- 00165 L
PROLINE FLOTEK FD (FLOOR DUCTED) SERVER
CABINET
INDUSTRY STANDARDS
UL Listed to UL 508A File Number E61997
cUL Listed to CSA C22.2 No. 14-18
EIA 310-D (RU – Rack Unit spacing, marking, and positioning)
IEC 60529, IP20
Perforated doors meet or exceed manufactures open space/air ow
ventilation requirements
APPLICATION
The PROLINE FLOTEK FD Server Cabinet uses the cooling power of
two banks of independently-powered fans in the back of the cabinet
and an integral front oor duct to direct air into server intakes when
positioned over a cutout in a raised data center oor. The cabinet
air inlet requires alignment with a oor cutout so blocking plates
can direct cool air from the oor plenum across the front of the
equipment.
FEATURES
•
Front window door provides a view of equipment inside the
enclosure without opening the door
•
Six 6-in. fans with integral nger guards in the rear doors pull
oor-ducted air through cabinet and exhaust it to hot aisle
•
Fans provide up to 1400 CFM airow
•
Fans on each door can be independently powered to provide
redundant cooling
• Blocking plates inside the cabinet on both sides and the top
prevent recirculation of hot exhaust air
• Solid top helps direct airow across equipment
• Sliding gland plate in top covers large opening that allows easy
routing of network cables, pre-terminated cables and patch
panels
• Models without sides t together quickly for easy installation in
ganged applications
• Three-point locking pushbutton swing handle on front door
provides easy but controlled access; two keys included.
• Rear doors are split for easy access and include a low-prole,
locking swing handle
• Two sets of 19-in. square-hole rack angles with EIA universal
spacing support both front and rear of equiment
• Includes mobile base with casters and anti-tip bracket to facilitate
moving cabinet into position
• Mounting hardware (20 each of 10-32 screws and cage nuts) is
included
SPECIFICATIONS
• 16 or 14 gauge steel front door frame, rear door, sides and cover
• Welded 12 gauge steel frame
• Window is made of .125-in. thick acrylic
• Rack angles have square holes with EIA 310-D spacing
• Duct ange in base for connecting to oor duct
FINISH
Pretreated steel coated with RAL 9005 black textured, low-gloss
polyester powder paint. Rack angles are coated with RAL 9005
black polyester powder paint. Other nishes available—contact
Hoffman Customer Service.
LOAD RATING
Static Load Rating: 2500 lb. (1134 kg)
A cabinet has a static load when:
• it is in its nal, permanent, fully secured location
• its levelers are fully extended
• the anti-tip bracket is installed
• its load is uniformly applied to the two sets of rack-mounting
angles, and
• the casters are not supporting any load (use the casters only to
move the cabinet to its nal location before loading)
Never move a cabinet with its maximum static load applied.
Contact Hoffman if further information is needed.
Casters Maximum Load: 1000 lb. (453 kg)
Exercise care when using casters to move the cabinet. Do not use
casters to move a cabinet with more than 1000 lb. (453 kg) load.
Avoid tipping and damage to the cabinet and its contents by slowly
moving the cabinet on its casters across smooth, at ooring. Avoid
obstructions such as:
• large cracks
• oor displacement
• seams
• gravel
Never use casters while transporting a cabinet by truck on
roadways.
Contact Hoffman if further information is needed.
Bulletin: DPSR
Standard Product
Catalog Number
AxBxC mm AxBxC in. Sides
Rack
Units
Rack Angle
PSFD2069B 2085 x 599 x 899 82.08 x 23.58 x 35.40 With sides 42 PRA1920THL1
PSFD2069BnS 2085 x 599 x 899 82.08 x 23.58 x 35.40 Without sides 42 PRA1920THL1
PSFD20610B 2085 x 599 x 999 82.08 x 23.58 x 39.34 With sides 42 PRA1920THL1
PSFD20610BnS 2085 x 599 x 999 82.08 x 23.58 x 39.34 Without sides 42 PRA1920THL1
PSFD20611B 2085 x 599 x 1099 82.08 x 23.58 x 43.28 With sides 42 PRA1920THL1
PSFD20611BnS 2085 x 599 x 1099 82.08 x 23.58 x 43.28 Without sides 42 PRA1920THL1
PSFD20612B 2085 x 599 x 1199 82.08 x 23.58 x 47.22 With sides 42 PRA1920THL1
PSFD20612BnS 2085 x 599 x 1199 82.08 x 23.58 x 47.22 Without sides 42 PRA1920THL1