Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresEnclosure 118.5x118.5x92.4mm

POLYCARBONATE AND ABS QLINE E

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICENONMETALLIC1

Spec-00410 F

Spec-00410

QLINE E, TYPE 4X

INDUSTRY STANDARDS

Polycarbonate Enclosure

UL 508A Listed; Type 4, 4X, 6, 12, 13; File No. E61997

cUL Listed per CSA C22.2 No 94; Type 4, 4X, 6, 12, 13; File No.

E61997

Enclosure flammability evaluated per UL 508A

NEMA/EEMAC Type 4, 4X, 6, 12, 13

CSA File No. 42186: Type 4, 4X, 12, 13

IEC 60529, IP67

ABS Enclosure

NEMA/EEMAC Type 4, 4X, 6, 12, 13

IEC 60529, IP67

APPLICATION

QLINE E Enclosures house larger controls, provide additional size-

range options and offer greater internal mounting flexibility than

smaller QLINE products. Featuring contoured bodies with flush

cover screws, they are functional in corrosive environments and

can withstand occasional submersion.

The ABS series shares the same features and similar physical

properties as the polycarbonate but is a more economical, non-UL

rated alternative.

SPECIFICATIONS

• Body is impact-resistant polycarbonate for PCE series andABS

for ABE series

• Opaque and clear covers are impact-resistant polycarbonate for

PCE, opaque covers areABS for ABE series

• Polycarbonate andABS material is easily punched, drilled, filed

or sawed

• Cross-point flush cover screws are strong, durable polyamide

• Cover includes a molded-in wire lead hole

• Mounting tracks along body side walls for PC card installation

• Molded internal pads for mounting optional panels, rails and

other components

• Seamless foam-in-place gasket assures watertight and dust-

tight seal

• Material is halogen free

FINISH

Polycarbonate and ABS enclosure material is RAL 7035 light-gray

inside and out. Optional panels are plated steel.

ACCESSORIES

Summary of content (6 pages)

PAGE 1
Polycarbonate and ABS QLINE E Spec-00410 QLINE E, Type 4X APPLICATION QLINE E Enclosures house larger controls, provide additional sizerange options and offer greater internal mounting flexibility than smaller QLINE products. Featuring contoured bodies with flush cover screws, they are functional in corrosive environments and can withstand occasional submersion.
PAGE 2
Polycarbonate and ABS QLINE E Standard Product Polycarbonate Catalog Number Q1388PCE Q1388PCECC Q13138PCE Q13138PCECC Q18138PCE Q18138PCECC Q18188PCE Q18188PCECC Q25188PCE Q25188PCECC Q13810PCE Q13810PCECC Q131310PCE Q131310PCECC Q181310PCE Q181310PCECC Q181810PCE Q181810PCECC Q251810PCE Q251810PCECC Q13813PCE Q13813PCECC Q131313PCE Q131313PCECC Q181313PCE Q181313PCECC Q181813PCE Q181813PCECC Q181315PCE Q181315PCECC Q181815PCE Q181815PCECC Q251815PCE Q251815PCECC AxBxC mm/in. 119 x 69 x 67 4.69 x 2.
PAGE 3
Polycarbonate and ABS QLINE E Standard Product ABS Catalog Number Q1388ABE Q1388ABECC Q13138ABE Q13138ABECC Q18138ABE Q18138ABECC Q18188ABE Q18188ABECC Q25188ABE Q25188ABECC Q13810ABE Q13810ABECC Q131310ABE Q131310ABECC Q181310ABE Q181310ABECC Q181810ABE Q181810ABECC Q251810ABE Q251810ABECC Q13813ABE Q13813ABECC Q131313ABE Q131313ABECC Q181313ABE Q181313ABECC Q181813ABE Q181813ABECC Q181315ABE Q181315ABECC Q181815ABE Q181815ABECC Q251815ABE Q251815ABECC 3 AxBxC mm/in. 75 x 125 x 75 2.95 x 4.92 x 2.
PAGE 4
Polycarbonate and ABS QLINE E nVent.com/HOFFMAN PH 763.422.
PAGE 5
Polycarbonate and ABS QLINE E Brass Inserts Self-tapping Brass Inserts fit into molded pads in the bottom of the enclosure. Inserts have an M2 internal machine screw thread and M4 self-tapping external thread. Catalog Number QEBI Description M2 thread inserts Qty. Pkg. 4 Bulletin: Q41Y Hinge Kit Includes two polyamid hinges, eight M4 self-tapping zinc-plated screws, eight flat washers and drilling template. Use on all QLINE E enclosures.
PAGE 6
Polycarbonate and ABS QLINE E Notes nVent.com/HOFFMAN PH 763.422.