Cut Sheet

FREE-STAND STAINLESS STEEL PREFERRED-CUTOUT DISCONNECTS WATERSHED STAinlESS STEEl
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEDISCONNECT3
Spec-00038 O
DISCONNECT MOUNTING SPACE
Disconnects are located by dimension E1. Wiring space W1 is
available when disconnect is installed in the enclosure.
E1 = 8.62 in. (219 mm) when C = 8.00 in. (203 mm)
E1 = 11.62 in. (295 mm) when C = 12.00 in. (305 mm)
W1 = Wiring Space.
See Technical Information for wire bend space.
Refer to
National Electrical Code
®
2005 article 430.10(B) for
wiring space required for line side conductors to be connected to
disconnect. Verify your application to determine if wiring space is
adequate.
Verify your application to determine if wiring space is adequate.
Consult disconnect
manufacturer for F1
and G1 dimensions.
SANITARY LEG KITS
Sanitary Leg Kits provide space
between the enclosure and the oor
for better washdown accessibility.
Available with xed or independently
adjustable legs. Adjustable leg
shown. Four legs per kit. Maintains
NEMA Type 4X rating when properly
installed on a Hoffman Type 4X
enclosure.
BULLETIN: WSY
Catalog Number
Description L (in.)
L (mm)
WSASLKSS Adjustable Sanitary Leg Kit 11.50 -12.50 292 -318
WSFSLKSS Fixed Sanitary Leg Kit 12.00 305