Cut Sheet

PRODUCT OVERVIEW
The T-100 serves as an above-insulation splice or tee for
up to three Raychem brand BTV, QTVR, XTV, KTV, or VPL
heating cables. It is approved by FM, CSA, and PTB(1) for use
in hazardous locations.
The T-100 integrates the functions of connection kits and
insulation entries. The rugged stand protects the heating
cable and allows for up to four inches (100 mm) of thermal
insulation.
The cold-applied core sealer does not require a heat gun or
torch for installation, so no hot work permit is necessary.
The silicone-free, noncuring sealant in the core sealer
allows easy installation and re-entry for maintenance.
The electrical connections in the T-100 are made with
insulated crimps. For a splice or tee connection with
terminal blocks, use the JBM-100.
Each kit contains all the necessary materials for a complete
installation except for the pipe straps, which must be
ordered separately.
DESCRIPTION
Above-insulation splice / tee kit appropriate for use in hazardous locations
KIT CONTENTS
1 splice / tee enclosure and lid
1 stand assembly
3 core sealers
3 green / yellow tubes
3 compression crimps
3 crimp insulating boots
2 grommet plugs
1 spanner wrench
1 strain relief assembly
Note: Order appropriate pipe straps separately (two straps per kit).
T-100
Splice or tee connection kit
1 / 3 THERMAL MANAGEMENT SOLUTIONS
EN-RaychemT100-DS-H53874 09/13
Self-Regulat- ing Cables
Power-Limiting Cables
Mineral Insu- lated Cables
Longline Heating
RTB Tubing Bundles
Tank Heating Snow and Ice Control and
Monitoring
Heat-Trace Panels
Engineered Products
Steam-Tracing Systems
Technical Data Sheets
Appendixes