Datasheet

7.41
Plug-in units – for VME
nVent.com/SCHROFF
|
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
3 U
04602060
6 U
04602061
• At 6 U the board position can be offset by 1 HP to the right by swapping
the top and bottom board supports; thus space is created for SMD com-
ponents on the left (solder) side;
for board thickness 1.6 mm only
DELIVERY COMPRISES (kit)
ORDER INFORMATION
NOTE
• Dimension front panel see page 7.45
KITS
PLUG-IN UNITS WITH TRAPEZIFORM EXTRACTOR
HANDLE, TYPE 1 – FRONT PANEL UNSHIELDED
5
4
13
14
8
9
11
6
2
3
1
98
8
14 13
9
11
4a
4
6
1a
2
3
1
Item Qty Description
3 U 6 U
1 11Extractor handle, trapezium shape, PPE, grey, bottom
1a – 1 Extractor handle, trapezium shape, PPE, grey, top
2 1 2 Identification plate, Al, 1.5 mm, anodised,
cut edges plain
3 1 2 Pivot bush, Ms
4 1 1 Board support, die-cast zinc, bottom
4a – 1 Board support, die-cast zinc, top
5 1 – Board support, die-cast zinc
6 1 1 Front panel for trapeziform extractor handle, front anodised,
rear irisdescent green chromated
8 2 2 Sleeve, PA, grey, up to 7 HP front panel width
8 4 4 Sleeve, PA, grey, from 8 HP front panel width
9 2 2 Collar screw, Pozidrive/slot, St, nickel-plated, M2.5 × 11 and
12.3, front panel width up to 7 HP
9 4 4 Collar screw, Pozidrive/slot, St, nickel-plated, M2.5 × 11 and
12.3, front panel width from 8 HP
11 1 2 Raised countersunk panhead screw, M2.5 × 8
13 2 2 Washer, A2.7, DIN 125
14 2 2 Pozidrive flathead screw, St, nickel-plated, M2.5 × 10
Width 3 U 6 U
HP Part no. Part no.
4
20817-443 20817-448
5
20817-444 20817-449
6
20817-445 20817-450
7
20817-446 20817-451
8
20817-447 20817-452
10
20817-456 20817-458
12
20817-457 20817-459