Datasheet

Test adapters
10.25
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
11192004
Photo shows 6 U test adaptor
11196001
a: Measuring field for current and voltage measurement
b: Measuring pin, e.g. for test prod
taa43143
Dimensional drawing of test adaptor
ServicePLUS see page 10.29
Main Catalogue
쮿 Layout of conductive tracks and layer build-up match the
requirements of the VME bus
쮿 Measuring field version for current and voltage measurement
(V/I), (a)
쮿 Additional measuring pins, e.g. for the probe tips of an
oscilloscope (b)
쮿 1 pin position for second test object,
1 pin position for terminator board
쮿 Voltage supply lines are designed for 2 A
쮿 6 U test adaptors consist of two 3 U test adaptors
linked via an intermediate adaptor
Delivery comprises
Order Information
P1 = system bus, P2 = I/O bus
Note
쮿 9 U test adaptor see page 10.26
Dimensions table VMEbus test adaptors
Test adaptors for VMEbus
Item Qty Description
1 1 Test adaptor with fitted guide rails and equipped
test bridges
2 10 Replacement test bridges
Height For board depth Connector type Part no.
Umm P1P2
3 160 C96 –
23021-001
3 160 – C96
23021-100
3 220 C96 –
23021-002
3 220 – C64
23021-103
3 220 – C96
23021-101
6 160 C96 C96
23022-002
6 220 C96 C96
23022-004
6 280 C96 C96
23022-010
Board height F (mm) G (mm)
3 U 123.65 100
6 U 257 233.35
For board depth A (mm) B (mm) C (mm) D (mm)
160 mm 423 350 237 175.24
220 mm 483 410 297 235.24
280 mm 543 470 417 355.24
A = overall length, B = extension
For further information www.schroff.biz/oneclick
oneClick search code = Part no.
10_1_Backplane_e.fm Seite 25 Mittwoch, 19. September 2012 8:40 08