Datasheet

ESD clip for guide rails



with Keying/coding block



The ESD clip ensures a conductive contact between the printed

board and horizontal rail, both on the solder side and on the

component side



The ESD clip for alignment pins (complying with IEEE) can be

mounted in the guide rails with keying/coding and in the

keying/coding block. It ensures a conductive contact between the

alignment pin of the insertion/extraction handle (IEL-, or IET-handle)

and the horizontal rail

Technical data:

Article number:

24560-255

Description

Qty

ESD clip

PAGE 1
ESD clip for guide rails Article number: 24560-255 with Keying/coding block The ESD clip ensures a conductive contact between the printed board and horizontal rail, both on the solder side and on the component side The ESD clip for alignment pins (complying with IEEE) can be mounted in the guide rails with keying/coding and in the keying/coding block.
PAGE 2
Montageanweisung ESD-Clip europacPRO Assemblyinstruction ESD-Clip europacPRO Instructionsdemontage Clipantistatique europacPRO 64560-104Rev.