Manualshelf

Datasheet

ManualsBrandsnVent Schroff Manuals19" Subracks & PartsGuide rail Red
1
Component - Plastics
E41938
E I DUPONT DE NEMOURS & CO INC
ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE 19880
T843FR (+)
Polybutylene Terephthalate (PBT), toughened, flame retardant, glass reinforced,
"Crastin", furnished as pellets
Min Thk Flame RTI RTI RTI
Color (mm) Class HWI HAI Elec Imp Str
ALL 1.5 V-0 2 0 130 120 130
3.0 V-0 1 0 130 130 130
6.0 V-0 1 0 130 130 130
Comparative Tracking Index (CTI):
2
Dimensional Stability (%):
0.0
High-Voltage Arc Tracking Rate
(HVTR):
3
High Volt, Low Current Arc Resis (D495):
6
Dielectric Strength (kV/mm):
17
Volume Resistivity (10
x
ohm-cm) :
13
(+) -
Virgin and regrind up to 50% by weight inclusive, have the same basic material
characteristics.
NOTE -
(1) Material designations that are color pigmented may be followed by suffix letters and
numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon
or "ZEN" for Zenite or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "THX"
for Thermx or "ETPV" for ETPV grades.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-
scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of
end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:
1996-01-25
Last Revised:
2003-11-21 Underwriters Laboratories Inc®
IEC and ISO Test Methods
Thickness
Test Name Test Method Units Tested (mm) Value
Flammability IEC 60695-11-10 Class (color) 1.5 V-0 (ALL)
3.0 V-0 (ALL)
6.0 V-0 (ALL)
Glow-Wire Flammability (GWFI) IEC 60695-2-12 C - -
Glow-Wire Ignition (GWIT) IEC 60695-2-13 C - -
IEC Comparative Tracking Index IEC 60112 Volts (Max) - -
IEC Ball Pressure IEC 60695-10-2 C - -
ISO Heat Deflection (1.80 MPa) ISO 75-2 C - -
ISO Tensile Strength ISO 527-2 MPa - -
ISO Flexural Strength ISO 178 MPa - -
ISO Tensile Impact ISO 8256
kJ/m
2
- -
ISO Izod Impact ISO 180
kJ/m
2
- -
ISO Charpy Impact ISO 179-2
kJ/m
2
- -
Underwriters Laboratories Inc®
Page
1
of
1
UL iQ™ for Plastics
http://iq.ul.com/iq/newiq/List.aspx?ULID=257844

Summary of content (1 pages)