Datasheet

Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
6.34
Main Catalogue
E 03/2009
Subracks – D ServicePLUS
06108083
Front view: position of guide rails to connector (EN 60603-2/
DIN 41612)
Guide rails form the interface between the subrack mechanics
and the sub-assemblies (PCBs, plug-in units, frame-type
plug-in units, ...).
Guide rails for standard applications are 2 HP wide. Guide rails
with coding (e.g. for CompactPCI or VME64bus applications) are
4 HP wide. Groove widths are 2 mm and 2.5 mm.
The guide rails are clipped into the rectangular cut-outs of the
horizontal rails. They can be additionally bolted to the horizontal
rail (type H only) for higher shock and vibration requirements.
The HP marking on the horizontal rail (28 HP and above) allows
the rails to be simply fitted in the correct position
(position of sub-assembly = "number in viewing window" or in front
of the arrow marking on the guide rails).
Applications for guide rails
Guide rails
4,07
5,08
2,54
3,55
0,3
DIN 41612
3,55
Application
For plug-in units and frame type plug-in units (with front panels)
(type: standard)
06102001
For boards without own front panel
(type: accessories or robust version)
06102002 06102005
For CompactPCI or VME64x plug-in units
(type: IEEE with coding; frame-type plug-in units may not be installed)
06106004
For drive unit plug-in units or boards of 4.4" (111.7 mm) height (type 4.4")
06104009
Accessories:
- ESD clips
- Keying/coding pegs
- PCB retainers
6_11_europacPRO_e_.fm Seite 34 Donnerstag, 23. April 2009 11:25 11