Datasheet

Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
5.90
Main Catalogue
E 03/2009
Desk-top cases – b
Order Information
Note
 For installation and assembly of heavier components
 The mounting plate is as wide as the case and is fixed
to the side panels
 A guide rail can be mounted on the first and last slot positions
 4.4" and "strengthened" guide rails cannot be used
Mounting plates
Mounting plate for fixing of heavy components
Mounting plate over entire width: mounting is on the side
panels
Mounting plate over partial width: mounting is on one side
panel and one mounting strip, or on 2 mounting strips
Assembly strip for partial widths
06102501 05806100
Board lengths
Al, 1.5 mm; for mounting over partial width,
please order fixing strips separately
St, 2 mm, zinc-plated; is bolted from front to rear onto the
horizontal rails; to fix mounting plates
Width W W
28 146.88 160
34562-745 30840-021
28 146.88 220
34562-749 30840-033
28 146.88 160
34562-753 30840-045
28 146.88 220
34562-757 30840-057
42 217.99 160
34562-746 30840-021
42 217.99 220
34562-750 30840-033
42 217.99 160
34562-754 30840-045
42 217.99 220
34562-758 30840-057
63 324.67 160
34562-747 30840-021
63 324.67 220
34562-751 30840-033
63 324.67 160
34562-755 30840-045
63 324.67 220
34562-759 30840-057
84 431.35 160
34562-748 30840-021
84 431.35 220
34562-752 30840-033
84 431.35 160
34562-756 30840-045
84 431.35 220
34562-760 30840-057
Assembly material for mounting plate,
PU 1 kit (Torx countersunk screw M4 x 5,
St, zinc-plated, 12 pieces;
screw M4 x 6, St, zinc-plated 10 pieces;
M4 square nut, St, zinc-plated, 10 pieces)
24560-184
–
Assembly kit for assembly strips of mounting
plate,
Torx screw M2.5 × 5, St, zinc-plated,
PU 100 pieces
–
24560-146
Buch compacPRO.book Seite 90 Montag, 6. April 2009 9:44 21