Datasheet
5.37
Desk-top cases – Y / -air
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Order Information
Note
쮿 Please order fixing material for assembly of mounting plate
separately
쮿 A guide rail can be mounted on the first and last slot position
쮿 4.4" and "reinforced" guide rails cannot be used
Mounting plates
Mounting plate Assembly strip for
partial widths
bpa45875 bpa46557
06812002
Al, 1.5 mm; for mounting over partial
width, please order assembly strips
separately
St, 2 mm, zinc-plated; is bolted from
front to rear onto the horizontal rails;
to fix mounting plates
Width Board lengths
HP mm mm 1 piece 1 piece
28 146.88 160
34562-745 30840-021
28 146.88 220
34562-749 30840-033
28 146.88 280
34562-753 30840-045
28 146.88 340
34562-757 30840-057
42 217.99 160
34562-746 30840-021
42 217.99 220
34562-750 30840-033
42 217.99 280
34562-754 30840-045
42 217.99 340
34562-758 30840-057
63 324.67 160
34562-747 30840-021
63 324.67 220
34562-751 30840-033
63 324.67 280
34562-755 30840-045
63 324.67 340
34562-759 30840-057
84 431.35 160
34562-748 30840-021
84 431.35 220
34562-752 30840-033
84 431.35 280
34562-756 30840-045
84 431.35 340
34562-760 30840-057
Assembly kit for mounting plate
PU 1 kit (Torx countersunk screw M4 x 5, St, zinc-
plated, 12 pieces; screw M4 x 6, St, zinc-plated,
10 pieces; M4 square nut, St, zinc-plated,
10 pieces)
24560-184
–
Assembly kit for assembly strips of mounting
plate
Torx screw
M2.5 × 5, St, zinc-plated, PU 100 pieces
–
24560-146
5_1_ratiopacPRO_e.fm Seite 37 Montag, 17. September 2012 7:04 19