Datasheet
6.41
Subracks – D ServicePLUS
Part number in bold face type: ready for despatch within 2 working days
Part number in normal type: ready for despatch within 10 working days
Main Catalogue
E 10/2012
Main Catalogue
Order Information
Main Catalogue
Order Information
Guide rail accessories
ESD clips, CompactPCI/VME 64
alignment pin for guide rails
Coding for subracks
Keying/coding block for
guide rails accessory type
Keying/coding
for CompactPCI, VME64x handles
to IEEE 1011.10 and
IEC 60297-3-103
06103052 06103051 04612052
Spring steel, tin-plated, ESD clip,
for alignment pin in accordance with IEEE;
can be plugged into the guide rails with
coding and into the keying/coding block;
provides conductive contact between the
alignment pin of the insertion/extractor
handle (IEL or IET handle)
and the horizontal rail
PBT, UL 94 V-0,
keying/coding block is clipped into the
horizontal rail next to the guide rail;
please order keying/coding pegs separately
Keying/coding peg, PBTP, UL 94 V-0,
RAL 7035
The keying/coding pegs prevent plug-in
units to be mounted in wrong slots.
They are inserted in the chambers of the
codable card guides as well as in the
insertion/extractor handles IEL or IET
(4 possible positions),
resulting in 64 codings per card guide;
when coding the upper and lower card
guide, 4096 codings will result;
Assembly Colour
PU 50 pieces 1 piece (SPQ 50) PU 100 pieces
above
red –
34579-232
–
grey –
34579-233 20817-501
silver
24560-256
– –
below
red –
34579-234
–
grey –
34579-235 20817-501
silver
24560-256
––
1) SPQ (standard pack quantity): Part number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ);
please order at least the SPQ quantity or a multiple
2) Part no. includes one packing unit (PU); delivery is exclusively made in PU
Guide rail accessories
ESD clips for guide rails Board locking for PCBs
without front panel;
for accessory type
guide rails
PCB handle
for board locking;
for accessory type
guide rails
Identification strips
04503050 04805050 04805051 06108076
Spring steel, tin-plated,
provides conductive contact
between board and
horizontal rail,
on both the solder side and the
component side
PBT, UL 94 V-0, red,
to fix the PCB in the subrack
(also slot 1),
can also be used without
board handle,
minimum distance 3 HP
PBT, UL 94 V-0, red, insertion/
extraction function with
connection to board locking
(also slot 1), mounting directly
behind front panel (above and
below), minimum distance 3 HP
Polyester film, 31 x 4 mm,
self-adhesive, white/matt
(1 A4 sheet contains
438 pieces)
Assembly Colour silver red red white/matt
mm
PU 50 pieces PU 10 pieces PU 10 pieces 1 piece
above/below
24560-255 24560-377 24560-378 60817-228
6_1_europacPRO_e_.fm Seite 41 Mittwoch, 10. Oktober 2012 1:19 13