User Manual
Table Of Contents
- Disclaimer
- i)Basic Operation Setting
- ii)Settings
- iii)Application
- iv)Troubleshooting Guide
- v)How to Wire Power Supply to A Car Stereo
15
EN
User can also go to "Car Setting" > "Navigation Setting">"Navigation Application Option"
to link the navigation button and application. Upon linkage, user may press the
"Navigation Button" to start the navigation directly.
3.5
Navigation Application Operation
Please refer to the corresponding operation manual for details in navigation application.
4.
Radio
Touch the radio icon“ ” on the main interface to enter radio mode. You may also touch
the radio icon at the application page.
4.1
Radio Channel Search
Use the arrow icon “ , ” at the radio interface to search for band channels.
When a channel is found, the search will stop automatically and the radio will start playing.
4.2
Media volume“ ” Slide to the left and right to adjust the media volume. Touch media
volume to mute.
4.3
Band Search
Touch band search to select :“ ”FM1,FM2,FM3;“ ”AM1,AM2
4.4
Automatic Channel Search
When you touch this icon “ ” at the radio interface, the system will automatically
search from low frequency to high frequency until it finds channel with the strongest
signal.
To stop the search, touch the icon again.
4.5
Sound settings“ ”
4.6
Off radio “ ”
4.7
Preset Radio Channel
Each band can store up to 6 radio channels. The system can store 24 radio channels (18
FM channels and 6 AM channels).