Manualshelf

User Manual

ManualsBrandsNVGOTEV ManualsCar & Vehicle ElectronicsCorolla Car Stereo DVD Player-Double Din in-Dash, Multimedia Receiver with 8 Inches Touchscreen, Built-in Bluetooth, GPS Navi, USB Port, SD, AUX Input, Radio Receiver, Applicable Models: (A)
12345678910
Page 10 of 11
2) Softly click the AVIN ”icon of main menu to switch audio/video input
mode.(External video/audio input).
BLUETOOTH HANDS-FREE OPERATION
The product support bluetooth hands-free function.Connect the mobile phones with
bluetooth function with this product and then operate the function of dialing/receiving
phone,bluetooth music playing., etc.
- Entry/Exit of Bluetooth Mode
Short press the function button of the product to enter main menu,
then click the “ ”(bluetooth hands-free ) icon of main menu to enter Bluetooth
Mode.
Click the (main menu) icon to exit Bluetooth menu and return to main menu.
- Bluetooth Matching and Connecting
Firstly match the Bluetooth of mobile phone and the product before using bluetooth
hands-free function.
Turn on the bluetooth function of mobile phone and search for the Bluetooth equipment.
After the product get the signal of mobile phone, its name will appear on the mobile
phone. When connecting with mobile phone, input the universal code “0000”and
confirm it.
After the mobile phone has been matched and connected with the product successfully,
the Bluetooth icon will appear on the top of interface.Otherwise, the Bluetooth icon will
not appear.
Click the Connecting key at the bottom of touch screen to enter the Bluetooth matching
and connecting mode.
Matching: Enter or exit matching mode. After mobile phone search the
equipment successfully, click “ match” key to connect the product with the
mobile phone.
Disconnecting :
Disconnect or connect the product with mobile phone..
Disconnect: Click the “Disconnect”key to disconnect the product with mobile phone.
Connect: Click the name of mobile phone which is disconnected with the product,then
they will be connected.
Deleting: Click the “delete” key to clear the bluetooth device which is unused.
Dialing:
In another way, click the “ ”icon of bluetooth interface to enter the dialing
interface as shown in the figure.
Softly click the number keys(0~9, # or *) on touch screen to display the phone numbers
on the number display window.
If the number is pressed by mistake, click the “ ”icon to delete it.
Click the “ ”icon on touch screen to delete all the input numbers .
After inputting phone numbers, softly click the “ ”key on touch screen to dial.