Manualshelf

User Manual

ManualsBrandsNVGOTEV ManualsCar & Vehicle ElectronicsCorolla Car Stereo DVD Player-Double Din in-Dash, Multimedia Receiver with 8 Inches Touchscreen, Built-in Bluetooth, GPS Navi, USB Port, SD, AUX Input, Radio Receiver, Applicable Models: (A)
12345678910
Table Of Contents
Page 4 of 10
ESP Electronic Shockproof Function
This function of the product protects audio and video playing which are less affected by
vibration of car when driving on the rough or uneven road .Notes that the shockproof
time is different according to different discs. The following shockproof time is for
reference only: DVD disc: about 5 seconds; CD / VCD discs: about 10 seconds;
MP3/WMA: about 150 seconds.
System Setting
Touch the System Setting icon on main menu to enter system setting interface.
Touch these different icons "Background Wallpaper", "Startup Picture", "Common
Settings", "Display Settings", "Audio Options", "Video Selection", "Bluetooth Options",
"Navigation Options", "Language Settings "," Steering Wheel Learning "," Date and
Time "and" About This Product "buttons to enter into the corresponding interfaces
1. Background Wallpaper
Click the “ / ”buttons as shown in the below figure to choose your favorite picture
from the wallpaper pictures as the background wallpaper . Totally 30 different pictures for
option.
You can customize the wallpaper too.
2. Startup Wallpaper
Enter the password “3506” into startup picture. Choose your favorite logo from the
different car logos as your startup picture.
3. Universal Setting
Beep Button(the beep sound when pressing or clicking buttons ): Click the slider
on the right side to turn on or turn off beep sound of buttons.
Mute when reversing: Click the slider on the right side to turn on or turn off mute
mode.
Touch Calibration:
Make a touch coordinate correction if the touch position deviation occur.
Click the " " icon, the asking prompt box "Sure to correct it "will pop up to ask
whether or not you want to correct it.
Choose yes(sure,or OK), then five "+" will appear successively.
Use the touch pen to click the center of every "+" when it appears.
Please aim at the center of "+" when calibrating it.
After successfully finishing the calibration of five "+" which are in four corners and
centre ,the system will automatically exit from Touch Calibration mode.
4. Display Setting
Daytime Brightness: Touch the adjustment button to adjust the brightness.
Navigation Background Sound: Touch the adjustment button to adjust the
volume of navigation background sound.
Headlights Automatic Detection: Click the slider on the right side to turn on or
turn off beep sound of buttons.
Screensaver Startup Time: Click the " " icon, the prompt box "never," "15
seconds", "30 seconds", "60 seconds" will pop up for option. You can choose your
favorite time from them.