User Manual

IMPORTANT SAFETY INFORMATION

General Precautions
To reduce the risk of personal injury or damage to the equipment:
>
Follow all cautions and instructions marked on the equipment.
Do not attempt to defeat safety interlocks (where provided).
>
Do not bend, drop, crush, puncture, incinerate,
or open glasses or IR emitter.
>
Do not perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
>
Never turn on any equipment when there is evidence
of fire, water, or structural damage.
>
Place the product away from radiators, heat registers,
stoves, amplifiers, or other products that produce heat.
>
Take care NOT to spill any food or liquid onto the glasses
or IR emitter. In the event that the parts do get wet,
unplug all cables before cleaning. Allow the equipment
to dry thoroughly before turning it on again.
>
Never force a connector into a port. Check
for obstructions on the port.
>
Avoid inserting foreign objects through openings in the product.
>
Do not insert foreign objects through openings in the product.
>
Do not make mechanical or electrical
modifications to the equipment.
>
To clean the glasses, use a soft, slightly damp, lint free
cloth. Avoid getting moisture in openings. Do not use window
cleaners, household cleaners, aerosol sprays, solvents,
alcohol, ammonia, or abrasives to clean glasses.
>
If the product sustains damage requiring service, disconnect
the product from the computer or USB charging adapter and
refer servicing to an NVIDIA authorized service provider.
>
As with any electronic equipment, dispose
of glasses and IR emitter properly.
>
When the IR emitter is operating, it is normal for it to
be warm to the touch. When charging the wireless
glasses, the battery compartment may feel warm.