User's Manual

January 2010 - 11 -
Some devkit operating system images may also require additional items to be connected,
including:
1) Expansion board. If required, the two ribbon cables connected to the small expansion
board should be connected to the matching pair of headers on the devkit main board’s
front edge. Take care to ensure that all of the pins align.
2) Ethernet. An Ethernet cable can be connected to the Ethernet jack on the left edge of the
devkit main board.
3) External storage. Operating systems requiring large file systems may require external
storage, either a USB “thumb drive” or a USB hard drive. In either case, these storage
devices should be connected to a powered hub that is in turn connected to the devkit
main board.