User's Manual

January 2010 - 5 -
Unboxing
Devkit Contents and Hardware Requirements
As shipped, your devkit should contain the following items:
• Devkit main board (rectangular circuit board containing the Tegra chip and connectors
for networking, USB peripherals, storage and display devices)
• 15V power adapter (USA 120V mains power connection)
• Adjustable, folding, threaded WiFi antenna
• Expansion board (smaller, square circuit board containing a serial port, LEDs and a few
buttons)
Also required to use the devkit, but not supplied (developer must provide these):
• Host PC with USB ports. The exact OS that this host PC must be running may differ
depending upon the devkit OS to be used, but is most frequently Microsoft Windows.
• USB mini (NOT micro, as with previous Tegra devkits) to USB cable (for device setup
and connectivity)
• External display supporting VGA (15-pin D-Sub), HDMI or DVI (via HDMI-to-DVI
adapter)
• SD card or USB-based “thumb drive” for additional storage
• USB mouse
• USB keyboard
Strongly recommended to use the devkit, but not supplied (developer should provide these):
• Powered USB hub
The devkit is the property of NVIDIA Corporation and must be returned to NVIDIA upon completion of use. The devkit is not FCC-
approved and may not be sold or leased.
Also, the devkit is intended to be used only by technically skilled professionals engaged in the creation of hardware and software
based on the technology demonstrated in the kit. As a device subject to professional installation, the installer is responsible for
ensuring that any antenna connected to the device will not result in emissions that exceed the limits in part 15 of the FCC Rules.