User's Manual

Settings
36
− Turn off Daydream
Go to SettingsDeviceDisplay
Touch Daydream
Slide the switch to Off.
 Font size
Provides the ability to adjust the font size between Small, Normal, Large, and Huge.
 Color correction preset
The default setting is sRGB which tells the system to use standard processing of color functions when sending
color managed output to the display. The native setting overrides standard sRGB and uses the settings that
are preprogrammed for the display.
NVIDIA DirectStylus™
DirectStylus uses the processing power of the Tegra 4 processor and is the most
innovative feature of Tegra Note 7. DirectStylus can recognize the difference between
a finger and a stylus to allow control of everything you do with your tablet. Sometimes it is nearly impossible to
tap small buttons on web pages with your finger, but it is really easy with the fine tip control of the stylus. Writing
and drawing are enabled with such precision that you can vary the width of a line simply by changing the angle of
the chisel tip stylus (in apps that recognize a pen).
Additional controls for ignoring finger input allow you to have utmost control with your stylus even when your
palm is on the display.
 Default action
When you remove the stylus from the tablet, it is detected and the system defaults to launching an interface
that shows all the stylus enabled applications you want. Select an application or touch outside the menu to
hide the launcher. This control allows you to redefine the default action.
 Show draw cursor
When this feature is enabled, a small cursor is drawn to show where the system sees the stylus. When you
move the pen quickly, the system sometimes lags but the cursor has ultra-fast 40 ms responsiveness that gives
you an immediate visual cue where electronic ink will eventually show up.
 Show eraser cursor
This feature shows a large circle where the erase function will be active when the system detects an eraser.
 Set Timer
Typically, when you use the stylus, there is a delay before you use your finger on the display. This timer sets a
period when finger events will be ignored after the stylus is used.
 Left-handed
If you are left handed, there are times that it is more convenient for menus in the Tegra Draw to appear on the
right side of the screen. Use this control to move the menu to the right side.
HDMI
If you use an HDMI display, you can tell the system to use sRGB color management or you can
set color management for default values.