User Manual

Power-Video-Data at the Camera End
1.Connect the NV-216A-PV or the NV-218A-PVD as shown in the examples on the other side.
2.Connect the 4-pair Cat5 UTP cables coming from the cameras into the appropriate camera port on the NV-704J-PVD using the RJ45 connector as shown in Figure 4 (previous page).
3.Connect the outputs of your independent power supply into the appropriate Camera Power terminals on the NV-704J-PVD. Torque to 2 in-lbs (0.22 Nm). NVT recommends the use of 18AWG (1,0 mm)
solid conductor wire. NVT also recommends that the external power supply have individually floating outputs.
Power-Video-Data at the Equipment Room End
4.Connect the NV-704J-PVD’s Control Room outputs to the NV-413A or NV-452R via UTP using RJ45 connectors and Cat5 cable. The control end pinouts are listed in Figure 5 (previous page). If P/T/Z
telemetry is required, connect a second RJ45 Cat5 cable from the data port to the DVR’s RS-422 or RS-485, control output.
Power-Video-Data at the Camera End
1. Connect the NV-216A-PV or the NV-218A-PVD as shown in the examples on the other side.
2. Connect the 4-pair Cat5 UTP cables coming from the cameras into the appropriate camera port on the NV-716J-PVD using the RJ45 connector as shown in Figure 4 (previous page).
3. Connect the outputs of your independent power supply into the appropriate Camera Power terminals on the NV-716J-PVD. Torque to 2 in-lbs (0.22 Nm) Figure 5 (previous page). NVT
recommends the use of 18AWG (1,0 mm) solid conductor wire. NVT also recommends that the external power supply have individually floating outputs.
Power-Video-Data at the Equipment Room End
4. Connect the NV-716J-PVD’s Control Room outputs to the NV-1613, NV-1613S, NV-1662 or NV-1672 via UTP using RJ45 connectors and Cat5 cable. See the NV-716J-PVD wiring
diagram above. If P/T/Z telemetry is required, connect additional RJ45 Cat5 cable(s) from the data port(s) to the DVR’s RS-422 or RS-485 Code Converter (alternately known as a
data distribution unit or fan-out unit.) Additional details can be found at www.nvt.com.
NV-716J-PVD Wiring Diagram
Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8
1
Video 1+ 1 Video 2+ 1 Video 3+ 1 Video 4+ 1 Video 5+ 1 Video 6+ 1 Video 7+ 1 Video 8+
2
Video 1- 2 Video 2- 2 Video 3- 2 Video 4- 2 Video 5- 2 Video 6- 2 Video 7- 2 Video 8-
3
Data A + 3 Data A + 3 Data A + 3 Data A + 3 Data B + 3 Data B + 3 Data B + 3 Data B +
4
Power 1- 4 Power 2- 4 Power 3- 4 Power 4- 4 Power 5- 4 Power 6- 4 Power 7- 4 Power 8-
5
Power 1+ 5 Power 2+ 5 Power 3+ 5 Power 4+ 5 Power 5+ 5 Power 6+ 5 Power 7+ 5 Power 8+
6
Data A - 6 Data A - 6 Data A - 6 Data A - 6 Data B - 6 Data B - 6 Data B - 6 Data B -
7
Power 1+ 7 Power 2+ 7 Power 3+ 7 Power 4+ 7 Power 5+ 7 Power 6+ 7 Power 7+ 7 Power 8+
8
Power 1- 8 Power 2- 8 Power 3- 8 Power 4- 8 Power 5- 8 Power 6- 8 Power 7- 8 Power 8-
C
hannel 9 Channel 10 Channel 11 Channel 12 Channel 13 Channel 14 Channel 15 Channel 16
1
Video 9+ 1 Video 10+ 1 Video 11+ 1 Video 12+ 1 Video 13+ 1 Video 14+ 1 Video 15+ 1 Video 16+
2
Video 9- 2 Video 10- 2 Video 11- 2 Video 12- 2 Video 13- 2 Video 14- 2 Video 15- 2 Video 16-
3
Data C + 3 Data C+ 3 Data C+ 3 Data C+ 3 Data D + 3 Data D+ 3 Data D+ 3 Data D+
4
Power 9- 4 Power 10- 4 Power 11- 4 Power 12- 4 Power 13- 4 Power 14- 4 Power 15- 4 Power 16-
5 Power 9+ 5 Power 10+ 5 Power 11+ 5 Power 12+ 5 Power 13+ 5 Power 14+ 5 Power 15+ 5 Power 16+
6 Data C - 6 Data C - 6 Data C - 6 Data C - 6 Data D- 6 Data D- 6 Data D- 6 Data D-
7 Power 9+ 7 Power 10+ 7 Power 11+ 7 Power 12+ 7 Power 13+ 7 Power 14+ 7 Power 15+ 7 Power 16+
8 Power 9- 8 Power 10- 8 Power 11- 8 Power 12- 8 Power 13- 8 Power 14- 8 Power 15- 8 Power 16-
Camera Connections
Limited Lifetime Warranty
N
VT warrants that the product conforms to NVT’s applicable published
specifications and is free of defects and workmanship, for the life of
t
he product.
T
here shall be no other warranties, express, statutory or otherwise,
including any implied warranty of merchantability of fitness or any
o
ther obligation on the part of NVT with respect to any of the products.
I
n the event that any product is damaged or altered or modified
without the express written consent of NVT, any warranty for those
p
roducts will cease and NVT will have no further liability as it pertains
t
o those products. NVT assumes no responsibility for damages or
penalties incurred resulting from the use of this product in a manner
or location other than for which it is intended.
N
VT’s liability under any warranties shall be discharged by replacing
o
r repairing any part or parts which do not conform to the applicable
w
arranty under normal and proper use. NVT’s liability with respect to
any product shall not exceed a refund of the price received by NVT for
that product, and in no event shall NVT have any liability for any
incidental, consequential, special, or indirect damages.
S
ome states do not allow the exclusion or limitation of special, incidental
o
r consequential damages, so the above limitation or exclusion may not
a
pply to you. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Customer Support
If you are experiencing problems, attempt to simplify your setup. Test
each cable segment separately. For example, test the camera and
monitor together without the other equipment. Then add in the NVT
t
ransceivers, back-to-back. Test each segment of a long cable-run
i
ndependently. Attempt to isolate the problem.
NVT customer support is available for consultation from 8:00 AM to
5:30 PM PST Monday through Friday. In addition, emergency after-
hours callback support is available.
U
S Office: (+1) [phone]
US Fax: (+1) [phone]
UK Office: (+44) (0)20 8977 6614
UK Fax: (+44) (0)20 8973 1855
Email USA: www.nvt.com/email
E
mail UK: www.nvt.com/email
W
eb home page: www.nvt.com
Returns
P
lease call before returning units to NVT. Returned materials must
h
ave a “Returned Materials Authorization” (RMA) number from NVT
marked on the outside of the shipping carton.
Agency
T
hese NVT products are listed and/or conform to the following
c
ertifications and directives:
U
L Listed to UL2044 or UL/IEC 60065.
c
UL Listed to CAN/CSA22.2 No. 1 for Canada.
C
E Mark under EMC and low voltage
C
omplies with FCC part 15B limits
D
irectives for the European Union.
Channel 1-4 Channel 5-8 Channel 9-12 Channel 13-16 Data/Telemetry
1 Video 2+ 1 Video 6+ 1 Video 10+ 1 Video 14+ 1 Data B+
2 Video 2- 2 Video 6- 2 Video 10- 2 Video 14- 2 Data B-
3 Video 3+ 3 Video 7+ 3 Video 11+ 3 Video 15+ 3 Data C+
4 Video 1- 4 Video 5- 4 Video 9- 4 Video 13- 4 Data A-
5 Video 1+ 5 Video 5+ 5 Video 9+ 5 Video 13+ 5 Data A+
6 Video 3 - 6 Video 7 - 6 Video 11 - 6 Video 15- 6 Data C-
7 Video 4+ 7 Video 8+ 7 Video 12+ 7 Video 16+ 7 Data D+
8 Video 4- 8 Video 8- 8 Video 12- 8 Video 16- 8 Data D-
Control Room Connections
Power-Video-Data 4-Channel Application using the NV-704J-PVD at the Telecommunications Closet or IDF
Power-Video-Data 16-Channel Application using the NV-716J-PVD at the Telecommunications Closet of IDF
Copyright (c) 2011 NVT, Inc. 451-218-1-H
08/11
RoHS
F
igure 7 Control End Pinouts (NV-716J-PVD)