Installation Guide

Features:
• Transmit 10/100 BaseT Full Duplex Ethernet up to 8,000ft (2,500m) or more over RG-59*
• Powers PoE entry stations (or other PoE, PoE+, or High Power devices), up to 60 watts *
• 48 or 56 VDC is distributed over the coax to all connected equipment. Powers PoE, PoE+, or High
Power PoE cameras (or other PoE devices), up to 60 watts*
• One EoC transceiver at the network-end can support multiple remote transceivers/IP cameras
using the NV-EC4BNC adaptor/splitter
• Up to four transceivers can be rack mounted on an NV-RMEC16 Rack Mount Tray Kit,
connecting up to 16 cameras
• Easy configuration, no PC required
• Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast etc.)
• Advanced 128-bit AES encrypted transmission and PoE+ power technology
• Built-in transient protection; Industrial temperature range
• Available in 1-4 Camera System Kits
• Limited lifetime warranty
The NVT Model NV-EC1701 Ethernet over Coax EoC Transceiver is a compact media converter
that allows 10/100 BaseT Ethernet and PoE+ power to be transmitted using coax cable. These devices
are often used in legacy installations where existing cable is re-deployed as part of an upgrade to IP
cameras. 48 or 56 VDC class 2 power is delivered to one transceiver, which distributes it to up to four
remote transceivers, and their PoE or PoE+ or High Power PoE cameras*.
These transceivers are extremely simple to use, with no IP or MAC addressing required. Status LEDs
indicate power and link connectivity/activity for RJ45 and BNC ports. They are backed by NVT’s award
winning customer support and limited lifetime warranty.
*Distance and number of devices supported will often be lower due to power delivery voltage-drop on the wire. See Wire Distance Chart on pages 8 & 9.
Model NV-EC1701
EoC Ethernet over Coax Transceiver
with PoE, PoE+, or High Power PoE
PRODUCT OVERVIEW
Page 2 of 14