Hardware Manual

ManualsBrandsNXP Austria ManualsElectronicsNTAG I2C plus Explorer Kit

1

2

3

4

5

6

7

8

9

Table Of Contents

1. NTAG I2C plus Explorer Kit OM5569/NT322E: Photo
2. NTAG I2C plus Explorer Kit OM5569/NT322E: Description
- 2.1. Operational desription
  - NXP’s NTAG I2C plus Explorer Kit is an all-in-one demonstration/development resource for NFC connected tags. Designed to emulate using an NTAG I2C tag chip in an embedded electronic system, the kit centers around a multi-purpose microprocessor-based development/Explorer board, and includes a full complement of hardware and software tools to support investigation of the NTAG I2C chip operation, the NFC RF communication link, and the I2C serial bus connected link; perform a variety of demonstrations; and develop/test your own applications.
3. NTAG I2C plus Expolorer Kit OM5569/NT322E: SPECIFICATION
4. INSTALLING MANUAL
- 4.1. Desktop use
- 4.2. Power supply
5. USER MANUAL
6. ELECTROMAGNETIC COMPATIBILITY
- 6.5.1. FCC Compliance Statement
- 6.5.2. COMPLIANCE INFORMATION according to 47CFR 2.1033
WARRANTY, LIMITATIONS OF LIABILITY

BL ID

Hardware Manual

Project Name: Integration Manual Project ID: 62743

1. NTAG I

2

C plus Explorer Kit OM5569/NT322E: Photo

Figure 1: NTAG I

2

C plus Explorer Kit OM5569/NT322E – Connected Tags Explorer Board

with NTAG I

2

C plus Antenna Board 54 x 27mm (pcb type).

Figure 2: Connected Tags Explorer Board OM5569, Rev 2.0.

SRSt Template 1.0 public © NXP B.V. 2015. All rights reserved

Doc ID: DOC-XXXXXX Doc Rev 1.00 Approved — 2015.09.01 3 of 18