User's Manual

Jennic
JennicJennic
Jennic
14 JN-DS-JN5148-001-Myy 1v1 © Jennic 2009
A.2 Module PCB Footprint
All dimensions are in mm.
Note: All modules have the same footprint.
Figure 6 Module PCB footprint
RF note for –M00 modules with integral antenna: No components, ground plane or tracks on any layer of the
mother board should be placed within 20mm of the 3 free sides of the antenna. Tracks etc may be placed
adjacent to the can, but should not extend past the can towards the antenna end of the module for 20mm
from the antenna.