User Manual

14 JN-DS-JN5148-001-Myy 1v5 © NXP Laboratories UK 2012
A.2 Module PCB Footprint
All dimensions are in mm.
2.49
2.23
2.23
1.27
17.42
1
1.5
Ø1
* *
Note: All modules have the same footprint except for the M06 which has 2 additional pins marked with a
*
Figure 5 Module PCB footprint
RF note for –M00 modules with integral antenna: No components, ground plane or tracks on any layer of the
mother board should be placed within 20mm of the 3 free sides of the antenna. Tracks etc may be placed
adjacent to the can, but should not extend past the can towards the antenna end of the module for 20mm
from the antenna.