User's Guide

20 JN-DS-JN5168-001-Myy 1v1 © NXP Laboratories UK 2012
A.5.2 Soldering Paste and Cleaning
NXP does not recommend use of a solder paste that requires the module and PCB assembly to be cleaned (rinsed in
water) for the following reasons:
Solder flux residues and water can be trapped by the PCB, can or components and result in short circuits.
The module label could be damaged or removed.
NXP recommends use of a 'no clean' solder paste for all its module products.
A.6 Ordering Information
Ordering Code Format:
Where this Data Sheet is denoted as “Advanced” or “Preliminary”, devices will be either Engineering Samples or
Prototypes.
Part Number
Description
JN5168-001-M00
Shipped in tape mounted 500 piece reel
JN5168-001-M03
JN5168-001-M05
JN5168-001-M06
Line
Content
Format
Options
Sample
1
NXP Logo
B&W outline logo
JN5168-001-M00
ZSDYWW NNNNN
FCC ID:TYOJN5168M0
IC:7438A-CYO5168M0
2
Part ID
JN5168-001-M0x
x is module type, 0,
3, 5 or 6
3
Z
SSMC
S
APK
D
RoHs
Compliant
Y
Year
WW
Week
3
Serial No.
NNNNN
Serial number from
test
5
FCC ID
FCCID:TYOJN5168Mx
x is module type
0,3,5 or 6
6
IC ID
IC:7438A-
CYO5168Mx
x is module type
0,3,5 or 6
JN5168 - 001 – MYY
Module Type (YY)
00 Standard Power, Integral antenna
03 Standard Power, uFl connector
05 Medium Power, uFL connector
06 High Power, uFl connector
Figure 13: Example module labelling