Datasheet

74AHC_AHCT86_2 © NXP B.V. 2007. All rights reserved.
Product data sheet Rev. 02 — 15 November 2007 4 of 14
NXP Semiconductors
74AHC86; 74AHCT86
Quad 2-input EXCLUSIVE-OR gate
7. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] P
tot
derates linearly with 8 mW/K above 70 °C.
[3] P
tot
derates linearly with 5.5 mW/K above 60 °C.
[4] P
tot
derates linearly with 4.5 mW/K above 60 °C.
8. Recommended operating conditions
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage −0.5 +7.0 V
V
I
input voltage −0.5 +7.0 V
I
IK
input clamping current V
I
< −0.5 V
[1]
−20 - mA
I
OK
output clamping current V
O
< −0.5 V or V
O
>V
CC
+ 0.5 V
[1]
- ±20 mA
I
O
output current V
O
= −0.5 V to (V
CC
+ 0.5 V) - ±25 mA
I
CC
supply current - 75 mA
I
GND
ground current −75 - mA
T
stg
storage temperature −65 +150 °C
P
tot
total power dissipation T
amb
= −40 °C to +125 °C
SO14 package
[2]
- 500 mW
TSSOP14 package
[3]
- 500 mW
DHVQFN14 package
[4]
- 500 mW
Table 5. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions 74AHC86 74AHCT86 Unit
Min Typ Max Min Typ Max
V
CC
supply voltage 2.0 5.0 5.5 4.5 5.0 5.5 V
V
I
input voltage 0 - 5.5 0 - 5.5 V
V
O
output voltage 0 - V
CC
0- V
CC
V
T
amb
ambient temperature −40 +25 +125 −40 +25 +125 °C
∆t/∆V input transition rise
and fall rate
V
CC
= 3.3 V ± 0.3 V - - 100 - - - ns/V
V
CC
= 5.0 V ± 0.5 V - - 20 - - 20 ns/V