INTEGRATED CIRCUITS 74ALVT162245 2.5V/3.
Philips Semiconductors Product specification 2.5V/3.
Philips Semiconductors Product specification 2.5V/3.
Philips Semiconductors Product specification 2.5V/3.3V 16-bit transceiver with 30Ω termination resistors (3-State) 74ALVT162245 ABSOLUTE MAXIMUM RATINGS1,2 PARAMETER SYMBOL VCC IIK RATING UNIT –0.5 to +4.6 V –50 mA –0.5 to +7.0 V VO < 0 –50 mA Output in Off or High state –0.5 to +7.
Philips Semiconductors Product specification 2.5V/3.3V 16-bit transceiver with 30Ω termination resistors (3-State) 74ALVT162245 DC ELECTRICAL CHARACTERISTICS (3.3V 0.3V RANGE) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C MIN VIK Input clamp voltage VCC = 3.0V; IIK = –18mA VOH High-level output voltage VCC = 3.0V; IOH = –12mA VOL Low–level output voltage VCC = 3.0V; IOL = 12mA Input In ut leakage current IHOLD IEX IPU/PD Off current Control pins VCC = 3.
Philips Semiconductors Product specification 2.5V/3.3V 16-bit transceiver with 30Ω termination resistors (3-State) 74ALVT162245 DC ELECTRICAL CHARACTERISTICS (2.5V 0.2V RANGE) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C MIN VIK Input clamp voltage VCC = 2.3V; IIK = –18mA VOH High-level output voltage VCC = 2.3V; IOH = –8mA VOL Low-level output voltage VCC = 2.3V; IOL = 12mA Input In ut leakage current IHOLD IEX IPU/PD 0.6 0.7 V Control pins VCC = 2.
Philips Semiconductors Product specification 2.5V/3.3V 16-bit transceiver with 30Ω termination resistors (3-State) 74ALVT162245 AC WAVEFORMS NOTES: 1. VM = 1.5V at VCC w 3.0V, VM = VCC/2 at VCC v 2.7V 2. VX = VOL + 0.3V at VCC w 3.0V, VX = VOL + 0.1 . VCC at VCC v 2.7V 3. VY = VOH – 0.3V at VCC w 3.0V, VY = VOH – 0.1 . VCC at VCC v 2.7V nAX OR nBX INPUT VM 3.0V or VCC whichever is less VM VM nOE INPUT 3.0V or VCC whichever is less VM 0V 0V TPLZ TPZL TPLH TPHL 3.
Philips Semiconductors Product specification 2.5V/3.3V ALVT 16-bit transceiver with 30Ω termination resistors (3-State) SSOP48: plastic shrink small outline package; 48 leads; body width 7.
Philips Semiconductors Product specification 2.5V/3.3V ALVT 16-bit transceiver with 30Ω termination resistors (3-State) TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.
Philips Semiconductors Product specification 2.5V/3.3V ALVT 16-bit transceiver with 30 termination resistors (3-State) 74ALVT162245 Data sheet status Data sheet status Product status Definition [1] Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice.
