Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsLogic ICsLogic IC - Multiplexer Multiplexer Single supply TSSOP 6

1. General description

The 74AUP1G157 is a single 2-input multiplexer which selects data from two data inputs

(I0 and I1) under control of a common data select input (S). The state of the common data

select input determines the particular register from which the data comes. The output (Y)

presents the selected data in the true (non-inverted) form.

Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall

times across the entire V

range from 0.8 V to 3.6 V.

This device ensures a very low static and dynamic power consumption across the entire

range from 0.8 V to 3.6 V.

This device is fully specified for partial power-down applications using I

OFF

The I

OFF

circuitry disables the output, preventing the damaging backflow current through

the device when it is powered down.

2. Features and benefits

 Wide supply voltage range from 0.8 V to 3.6 V

 High noise immunity

 Complies with JEDEC standards:

 JESD8-12 (0.8 V to 1.3 V)

 JESD8-11 (0.9 V to 1.65 V)

 JESD8-7 (1.2 V to 1.95 V)

 JESD8-5 (1.8 V to 2.7 V)

 JESD8-B (2.7 V to 3.6 V)

 ESD protection:

 HBM JESD22-A114F Class 3A exceeds 5000 V

 MM JESD22-A115-A exceeds 200 V

 CDM JESD22-C101E exceeds 1000 V

 Low static power consumption; I

= 0.9 μA (maximum)

 Latch-up performance exceeds 100 mA per JESD 78 Class II

 Inputs accept voltages up to 3.6 V

 Low noise overshoot and undershoot < 10 % of V

 I

OFF

circuitry provides partial Power-down mode operation

 Multiple package options

 Specified from −40 °Cto+85°C and −40 °Cto+125°C

74AUP1G157

Low-power 2-input multiplexer

Rev. 5 — 22 June 2012 Product data sheet

Summary of content (20 pages)

PAGE 1
74AUP1G157 Low-power 2-input multiplexer Rev. 5 — 22 June 2012 Product data sheet 1. General description The 74AUP1G157 is a single 2-input multiplexer which selects data from two data inputs (I0 and I1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y) presents the selected data in the true (non-inverted) form.
PAGE 2
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AUP1G157GW −40 °C to +125 °C SC-88 plastic surface-mounted package; 6 leads SOT363 74AUP1G157GM −40 °C to +125 °C XSON6 plastic extremely thin small outline package; no leads; SOT886 6 terminals; body 1 × 1.45 × 0.
PAGE 3
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer I1 I0 1 3 SELECTOR 4 MULTIPLEXER OUTPUT S Y 6 S Fig 3. 001aac655 Functional diagram S I1 Y I0 001aac654 Fig 4. Logic diagram 74AUP1G157 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 5 — 22 June 2012 © NXP B.V. 2012. All rights reserved.
PAGE 4
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 6. Pinning information 6.1 Pinning 74AUP1G157 74AUP1G157 I1 1 6 I1 1 6 S GND 2 5 VCC 74AUP1G157 S GND 2 5 VCC I0 3 4 Y I0 3 4 Y I1 1 6 S GND 2 5 VCC I0 3 4 Y 001aae017 001aae016 Fig 5. Transparent top view Transparent top view 001aae015 Pin configuration SOT363 Fig 6. Pin configuration SOT886 Fig 7. Pin configuration SOT891, SOT1115 and SOT1202 6.2 Pin description Table 3.
PAGE 5
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC supply voltage IIK input clamping current VI input voltage IOK output clamping current Conditions VI < 0 V [1] VO < 0 V [1] Min Max Unit −0.5 +4.6 V −50 - mA −0.5 +4.6 V −50 - mA −0.5 +4.
PAGE 6
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 10. Static characteristics Table 7. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min VCC = 0.8 V VCC = 0.9 V to 1.95 V Typ Max Unit 0.70 × VCC - - V 0.65 × VCC - - V VCC = 2.3 V to 2.7 V 1.6 - - V VCC = 3.0 V to 3.6 V 2.0 - - V VCC = 0.8 V - - 0.30 × VCC V VCC = 0.9 V to 1.95 V - - 0.35 × VCC V VCC = 2.3 V to 2.7 V - - 0.
PAGE 7
4AUP1G157 NXP Semiconductors Low-power 2-input multiplexer Table 7. Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min VCC = 0.8 V Typ Max Unit 0.70 × VCC - - V VCC = 0.9 V to 1.95 V 0.65 × VCC - - V VCC = 2.3 V to 2.7 V 1.6 - - V VCC = 3.0 V to 3.6 V 2.0 - - V VCC = 0.8 V - - 0.30 × VCC V VCC = 0.9 V to 1.95 V - - 0.35 × VCC V VCC = 2.3 V to 2.7 V - - 0.7 V VCC = 3.
PAGE 8
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer Table 7. Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min VCC = 0.8 V Typ Max Unit 0.75 × VCC - - V VCC = 0.9 V to 1.95 V 0.70 × VCC - - V VCC = 2.3 V to 2.7 V 1.6 - - V VCC = 3.0 V to 3.6 V 2.0 - - V VCC = 0.8 V - - 0.25 × VCC V VCC = 0.9 V to 1.95 V - - 0.30 × VCC V VCC = 2.3 V to 2.7 V - - 0.7 V VCC = 3.
PAGE 9
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 11. Dynamic characteristics Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 9. Symbol Parameter 25 °C Conditions −40 °C to +125 °C Unit Min Typ[1] Max Min - 19.9 - - - - ns VCC = 1.1 V to 1.3 V 2.3 5.7 11.2 2.1 11.4 12.6 ns VCC = 1.4 V to 1.6 V 1.7 4.0 6.5 1.9 7.0 7.7 ns VCC = 1.65 V to 1.95 V 1.6 3.2 5.2 1.5 5.8 6.4 ns VCC = 2.3 V to 2.7 V 1.
PAGE 10
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer Table 8. Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 9. Symbol Parameter 25 °C Conditions −40 °C to +125 °C Unit Min Typ[1] Max Min VCC = 0.8 V - 2.6 - - - - pF VCC = 1.1 V to 1.3 V - 2.7 - - - - pF VCC = 1.4 V to 1.6 V - 2.8 - - - - pF VCC = 1.65 V to 1.95 V - 2.9 - - - - pF VCC = 2.3 V to 2.7 V - 3.4 - - - - pF VCC = 3.0 V to 3.
PAGE 11
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer VCC VEXT 5 kΩ G VI VO DUT CL RT RL 001aac521 Test data is given in Table 10. Definitions for test circuit: RL = Load resistance. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to the output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Fig 9. Table 10.
PAGE 12
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 13. Package outline Plastic surface-mounted package; 6 leads SOT363 D E B y X A HE 6 5 v M A 4 Q pin 1 index A A1 1 2 e1 3 bp c Lp w M B e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max bp c D E e e1 HE Lp Q v w y mm 1.1 0.8 0.1 0.30 0.20 0.25 0.10 2.2 1.8 1.35 1.15 1.3 0.65 2.2 2.0 0.45 0.15 0.25 0.15 0.2 0.2 0.
PAGE 13
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer SOT886 XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm b 1 2 3 4x (2) L L1 e 6 5 e1 4 e1 6x A (2) A1 D E terminal 1 index area 0 1 2 mm scale Dimensions (mm are the original dimensions) Unit mm max nom min A(1) 0.5 A1 b D E 0.04 0.25 1.50 1.05 0.20 1.45 1.00 0.17 1.40 0.95 e e1 0.6 0.5 L L1 0.35 0.40 0.30 0.35 0.27 0.32 Notes 1. Including plating thickness. 2.
PAGE 14
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm 1 SOT891 b 3 2 4× (1) L L1 e 6 5 e1 4 e1 6× A (1) A1 D E terminal 1 index area 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max A1 max b D E e e1 L L1 mm 0.5 0.04 0.20 0.12 1.05 0.95 1.05 0.95 0.55 0.35 0.35 0.27 0.40 0.32 Note 1. Can be visible in some manufacturing processes.
PAGE 15
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer XSON6: extremely thin small outline package; no leads; 6 terminals; body 0.9 x 1.0 x 0.35 mm 1 SOT1115 b 3 2 (4×)(2) L L1 e 6 5 4 e1 e1 (6×)(2) A1 A D E terminal 1 index area 0 0.5 scale Dimensions Unit mm 1 mm A(1) A1 b D E e e1 max 0.35 0.04 0.20 0.95 1.05 nom 0.15 0.90 1.00 0.55 min 0.12 0.85 0.95 0.3 L L1 0.35 0.40 0.30 0.35 0.27 0.32 Note 1. Including plating thickness. 2.
PAGE 16
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer XSON6: extremely thin small outline package; no leads; 6 terminals; body 1.0 x 1.0 x 0.35 mm 1 SOT1202 b 3 2 (4×)(2) L L1 e 6 5 4 e1 e1 (6×)(2) A1 A D E terminal 1 index area 0 0.5 scale Dimensions Unit mm 1 mm A(1) A1 b D E e e1 L L1 max 0.35 0.04 0.20 1.05 1.05 0.35 0.40 nom 0.15 1.00 1.00 0.55 0.35 0.30 0.35 min 0.12 0.95 0.95 0.27 0.32 Note 1. Including plating thickness. 2.
PAGE 17
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 14. Abbreviations Table 11. Abbreviations Acronym Description CDM Charged Device Model DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model 15. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes 74AUP1G157 v.5 20120622 Product data sheet - 74AUP1G157 v.4 Modifications: 74AUP1G157 v.4 Modifications: 74AUP1G157 v.
PAGE 18
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 16. Legal information 16.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
PAGE 19
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use.
PAGE 20
74AUP1G157 NXP Semiconductors Low-power 2-input multiplexer 18. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 16.1 16.2 16.3 16.4 17 18 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . .