Datasheet

74AUP1G74 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
Product data sheet Rev. 9 — 6 January 2014 9 of 28
NXP Semiconductors
74AUP1G74
Low-power D-type flip-flop with set and reset; positive-edge trigger
11. Dynamic characteristics
Table 9. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 10.
Symbol Parameter Conditions T
amb
= 25 C T
amb
= 40 C to +125 C Unit
Min Typ
[1]
Max Min Max
(85 C)
Min Max
(125 C)
C
L
= 5 pF
t
pd
propagation
delay
CP to Q, Q; see Figure 8
[2]
V
CC
= 0.8 V - 25.4 - - - - - ns
V
CC
= 1.1 V to 1.3 V 2.9 6.7 14.0 2.6 14.2 2.6 14.2 ns
V
CC
= 1.4 V to 1.6 V 2.4 4.5 7.6 2.3 8.3 2.3 8.6 ns
V
CC
= 1.65 V to 1.95 V 1.9 3.5 5.7 1.7 6.5 1.7 6.8 ns
V
CC
= 2.3 V to 2.7 V 1.7 2.6 3.8 1.4 4.4 1.4 4.7 ns
V
CC
= 3.0 V to 3.6 V 1.5 2.2 3.1 1.2 3.4 1.2 3.7 ns
S
DtoQ,Q; see Figure 9
[2]
V
CC
= 0.8 V - 19.6 - - - - - ns
V
CC
= 1.1 V to 1.3 V 2.7 5.6 11.0 2.5 11.4 2.5 11.5 ns
V
CC
= 1.4 V to 1.6 V 2.4 4.0 6.3 2.2 6.9 2.2 7.3 ns
V
CC
= 1.65 V to 1.95 V 2.0 3.3 4.9 1.7 5.6 1.7 5.9 ns
V
CC
= 2.3 V to 2.7 V 1.9 2.7 3.7 1.7 4.0 1.7 4.2 ns
V
CC
= 3.0 V to 3.6 V 1.8 2.5 3.2 1.5 3.6 1.5 3.8 ns
R
DtoQ,Q; see Figure 9
[2]
V
CC
= 0.8 V - 19.2 - - - - - ns
V
CC
= 1.1 V to 1.3 V 2.6 5.5 11.0 2.5 11.3 2.5 11.5 ns
V
CC
= 1.4 V to 1.6 V 2.3 3.9 6.3 2.2 6.8 2.2 7.3 ns
V
CC
= 1.65 V to 1.95 V 1.9 3.2 5.0 1.8 5.6 1.8 5.9 ns
V
CC
= 2.3 V to 2.7 V 1.9 2.6 3.6 1.7 4.1 1.7 4.3 ns
V
CC
= 3.0 V to 3.6 V 1.8 2.4 3.3 1.5 3.6 1.5 3.8 ns
f
max
maximum
frequency
CP; see Figure 8
V
CC
= 0.8 V - 53 - - - - - MHz
V
CC
= 1.1 V to 1.3 V - 203 - 170 - 170 - MHz
V
CC
= 1.4 V to 1.6 V - 347 - 310 - 300 - MHz
V
CC
= 1.65 V to 1.95 V - 435 - 400 - 390 - MHz
V
CC
= 2.3 V to 2.7 V - 550 - 490 - 480 - MHz
V
CC
= 3.0 V to 3.6 V - 619 - 550 - 510 - MHz