Datasheet
74AUP2G07 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 7 — 29 November 2012 4 of 18
NXP Semiconductors
74AUP2G07
Low-power dual buffer with open-drain output
8. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SC-88 package: above 87.5 C the value of P
tot
derates linearly with 4.0 mW/K.
For XSON6 packages: above 118 C the value of P
tot
derates linearly with 7.8 mW/K.
9. Recommended operating conditions
10. Static characteristics
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.5 +4.6 V
I
IK
input clamping current V
I
<0V 50 - mA
V
I
input voltage
[1]
0.5 +4.6 V
I
OK
output clamping current V
O
<0V 50 - mA
V
O
output voltage Active mode and Power-down mode
[1]
0.5 +4.6 V
I
O
output current V
O
=0 VtoV
CC
-20mA
I
CC
supply current - 50 mA
I
GND
ground current 50 - mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation T
amb
= 40 C to +125 C
[2]
-250mW
Table 6. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.8 3.6 V
V
I
input voltage 0 3.6 V
V
O
output voltage Active mode and Power-down mode 0 3.6 V
T
amb
ambient temperature 40 +125 C
t/V input transition rise and fall rate V
CC
= 0.8 V to 3.6 V 0 200 ns/V
Table 7. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
T
amb
= 25 C
V
IH
HIGH-level input voltage V
CC
= 0.8 V 0.70 V
CC
-- V
V
CC
= 0.9 V to 1.95 V 0.65 V
CC
-- V
V
CC
= 2.3 V to 2.7 V 1.6 - - V
V
CC
= 3.0 V to 3.6 V 2.0 - - V
V
IL
LOW-level input voltage V
CC
= 0.8 V - - 0.30 V
CC
V
V
CC
= 0.9 V to 1.95 V - - 0.35 V
CC
V
V
CC
= 2.3 V to 2.7 V - - 0.7 V
V
CC
= 3.0 V to 3.6 V - - 0.9 V