Datasheet

1. General description
The 74AUP2G14 provides two inverting buffers with Schmitt trigger action which accept
standard input signals. They are capable of transforming slowly changing input signals
into sharply defined, jitter-free output signals.
This device ensures a very low static and dynamic power consumption across the entire
V
CC
range from 0.8 V to 3.6 V.
This device is fully specified for partial power-down applications using I
OFF
. The I
OFF
circuitry disables the output, preventing the damaging backflow current through the device
when it is powered down.
The inputs switch at different points for positive and negative-going signals. The difference
between the positive voltage V
T+
and the negative voltage V
T
is defined as the input
hysteresis voltage V
H
.
2. Features and benefits
 Wide supply voltage range from 0.8 V to 3.6 V
 High noise immunity
 ESD protection:
 HBM JESD22-A114F Class 3A exceeds 5000 V
 MM JESD22-A115-A exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V
 Low static power consumption; I
CC
= 0.9 A (maximum)
 Latch-up performance exceeds 100 mA per JESD 78 Class II
 Inputs accept voltages up to 3.6 V
 Low noise overshoot and undershoot < 10 % of V
CC
 I
OFF
circuitry provides partial Power-down mode operation
 Multiple package options
 Specified from 40 Cto+85C and 40 Cto+125C
3. Applications
 Wave and pulse shaper
 Astable multivibrator
 Monostable multivibrator
74AUP2G14
Low-power dual Schmitt trigger inverter
Rev. 5 — 4 December 2012 Product data sheet