Datasheet
74AUP2G14 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 4 December 2012 4 of 21
NXP Semiconductors
74AUP2G14
Low-power dual Schmitt trigger inverter
9. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SC-88 packages: above 87.5 C the value of P
tot
derates linearly with 4.0 mW/K.
For XSON6 packages: above 118 C the value of P
tot
derates linearly with 7.8 mW/K.
10. Recommended operating conditions
11. Static characteristics
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.5 +4.6 V
I
IK
input clamping current V
I
<0V 50 - mA
V
I
input voltage
[1]
0.5 +4.6 V
I
OK
output clamping current V
O
<0V 50 - mA
V
O
output voltage Active mode and Power-down mode
[1]
0.5 +4.6 V
I
O
output current V
O
=0 VtoV
CC
- 20 mA
I
CC
supply current - 50 mA
I
GND
ground current 50 - mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation T
amb
= 40 C to +125 C
[2]
-250mW
Table 6. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.8 3.6 V
V
I
input voltage 0 3.6 V
V
O
output voltage Active mode 0 V
CC
V
Power-down mode; V
CC
=0V 0 3.6 V
T
amb
ambient temperature 40 +125 C
Table 7. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
T
amb
= 25 C
V
OH
HIGH-level output voltage V
I
= V
T+
or V
T
I
O
= 20 A; V
CC
= 0.8 V to 3.6 V V
CC
0.1 - - V
I
O
= 1.1 mA; V
CC
= 1.1 V 0.75 V
CC
-- V
I
O
= 1.7 mA; V
CC
= 1.4 V 1.11 - - V
I
O
= 1.9 mA; V
CC
= 1.65 V 1.32 - - V
I
O
= 2.3 mA; V
CC
= 2.3 V 2.05 - - V
I
O
= 3.1 mA; V
CC
= 2.3 V 1.9 - - V
I
O
= 2.7 mA; V
CC
= 3.0 V 2.72 - - V
I
O
= 4.0 mA; V
CC
= 3.0 V 2.6 - - V