Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsLogic ICsLogic IC - Inverter Inverter 74HC SO 14

1. General description

The 74HC14-Q100; 74HCT14-Q100 is a high-speed Si-gate CMOS device and is pin

compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with

JEDEC standard No. 7A.

The 74HC14-Q100; 74HCT14-Q100 provides six inverting buffers with Schmitt-trigger

action. They are capable of transforming slowly changing input signals into sharply

defined, jitter-free output signals.

This product has been qualified to the Automotive Electronics Council (AEC) standard

Q100 (Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

 Automotive product qualification in accordance with AEC-Q100 (Grade 1)

 Specified from 40 C to +85 C and from 40 C to +125 C

 Low-power dissipation

 ESD protection:

 MIL-STD-883, method 3015 exceeds 2000 V

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )

 Multiple package options

3. Applications

 Wave and pulse shapers

 Astable multivibrators

 Monostable multivibrators

74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

Rev. 4 — 19 April 2013 Product data sheet

Summary of content (20 pages)

PAGE 1
74HC14-Q100; 74HCT14-Q100 Hex inverting Schmitt trigger Rev. 4 — 19 April 2013 Product data sheet 1. General description The 74HC14-Q100; 74HCT14-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7A. The 74HC14-Q100; 74HCT14-Q100 provides six inverting buffers with Schmitt-trigger action. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals.
PAGE 2
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74HC14N-Q100 40 C to +125 C DIP14 plastic dual in-line package; 14 leads (300 mil) SOT27-1 74HC14D-Q100 40 C to +125 C SO14 plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 40 C to +125 C TSSOP14 plastic thin shrink small outline package; 14 leads; body width 4.
PAGE 3
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 6. Pinning information 6.1 Pinning $ WHUPLQDO LQGH[ DUHD +& 4 +&7 4 9&& +& 4 +&7 4 < $ $ 9&& $ < < $ < $ $ < < $ $ $ < < < $ *1' < *1' < *1' < $ DDD 7UDQVSDUHQW WRS YLHZ DDD (1) This is not a supply pin.
PAGE 4
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 8. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC supply voltage Conditions Min Max Unit 0.5 +7 V - 20 mA - 20 mA - 25 mA 50 mA IIK input clamping current VI < 0.5 V or VI > VCC + 0.5 V [1] IOK output clamping current VO < 0.5 V or VO > VCC + 0.
PAGE 5
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 10. Static characteristics Table 6. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Tamb = 25 C Conditions Tamb = 40 C to +85 C Tamb = 40 C to +125 C Unit Min Typ Max Min Max Min Max IO = 20 A; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V IO = 20 A; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V IO = 20 A; VCC = 6.0 V 5.9 6.
PAGE 6
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 11. Dynamic characteristics Table 7. Dynamic characteristics GND = 0 V; CL = 50 pF; for load circuit see Figure 7. Symbol Parameter Tamb = 25 C Conditions Tamb = 40 C to +125 C Unit Min Typ Max Max (85 C) Max (125 C) VCC = 2.0 V - 41 125 155 190 ns VCC = 4.5 V - 15 25 31 38 ns VCC = 5.0 V; CL = 15 pF - 12 - - - ns - 12 21 26 32 ns VCC = 2.0 V - 19 75 95 110 ns VCC = 4.
PAGE 7
4HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 12. Waveforms VI VM nA input VM GND t PHL t PLH VOH 90 % VM VM nY output 10 % VOL t THL t TLH mna722 Measurement points are given in Table 8. VOL and VOH are typical voltage output levels that occur with the output load. Fig 6. Input to output propagation delays Table 8. Measurement points Type Input Output VM VM VX VY 74HC14-Q100 0.5VCC 0.5VCC 0.1VCC 0.9VCC 74HCT14-Q100 1.3 V 1.3 V 0.1VCC 0.
PAGE 8
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger Table 9. Test data Type Input Load Test VI tr, tf CL 74HC14-Q100 VCC 6.0 ns 15 pF, 50 pF tPLH, tPHL 74HCT14-Q100 3.0 V 6.0 ns 15 pF, 50 pF tPLH, tPHL 13. Transfer characteristics Table 10. Transfer characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V); see Figure 8 and Figure 9.
PAGE 9
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger mna846 50 mna847 1.0 ICC (μA) ICC (mA) 40 0.8 30 0.6 20 0.4 10 0.2 0 0 0 0.4 0.8 1.2 1.6 2.0 1 0 VI (V) 2 3 4 5 VI (V) a. VCC = 2.0 V b. VCC = 4.5 V mna848 1.0 ICC (mA) 0.8 0.6 0.4 0.2 0 0 1.2 2.4 3.6 4.8 6.0 VI (V) c. VCC = 6.0 V Fig 10. Typical 74HC transfer characteristics 74HC_HCT14_Q100 Product data sheet All information provided in this document is subject to legal disclaimers.
PAGE 10
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger mna849 1.5 mna850 1.8 ICC (mA) ICC (mA) 1.5 1.2 1.2 0.9 0.9 0.6 0.6 0.3 0.3 0 0 0 1 2 3 4 5 0 1 2 3 4 5 6 VI (V) VI (V) a. VCC = 4.5 V b. VCC = 5.5 V Fig 11. Typical 74HCT transfer characteristics 15.
PAGE 11
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger mna852 400 ICC(AV) (μA) 300 200 positive - going edge 100 negative - going edge 0 0 2 4 VCC (V) 6 (1) Positive-going edge. (2) Negative-going edge. Fig 12. Average additional supply current as a function of VCC for 74HC14-Q100; linear change of VI between 0.1VCC to 0.9VCC. mna853 400 ICC(AV) (μA) positive - going edge 300 200 negative - going edge 100 0 0 2 4 VCC (V) 6 (1) Positive-going edge.
PAGE 12
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger R C mna035 For 74HC14-Q100 and 74HCT14-Q100: 1 1 f = ---  -----------------T K  RC For K-factor see Figure 15 Fig 14. Relaxation oscillator DDD DDD . . 9&& 9 K-factor for 74HC14-Q100 9&& 9 K-factor for 74HCT14-Q100 Fig 15.
PAGE 13
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 16. Package outline DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1 ME seating plane D A2 A A1 L c e Z w M b1 (e 1) b MH 8 14 pin 1 index E 1 7 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 min. A2 max. b b1 c D (1) E (1) e e1 L ME MH w Z (1) max. mm 4.2 0.51 3.2 1.73 1.13 0.53 0.38 0.36 0.23 19.50 18.55 6.48 6.
PAGE 14
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 D E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index θ Lp 1 L 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.
PAGE 15
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 E D A X c y HE v M A Z 8 14 Q (A 3) A2 A A1 pin 1 index θ Lp L 1 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.
PAGE 16
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; SOT762-1 14 terminals; body 2.5 x 3 x 0.85 mm A B D A A1 E c detail X terminal 1 index area terminal 1 index area C e1 e 2 6 y y1 C v M C A B w M C b L 1 7 Eh e 14 8 13 9 Dh X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A(1) max.
PAGE 17
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 17. Abbreviations Table 11. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model LSTTL Low-power Schottky Transistor-Transistor Logic MM Machine Model MIL Military 18. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes 74HC_HCT14_Q100 v.
PAGE 18
74HC14-Q100; 74HCT14-Q100 NXP Semiconductors Hex inverting Schmitt trigger 19. Legal information 19.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
PAGE 19
NXP Semiconductors 74HC14-Q100; 74HCT14-Q100 Hex inverting Schmitt trigger No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Translations — A non-English (translated) version of a document is for reference only.
PAGE 20
NXP Semiconductors 74HC14-Q100; 74HCT14-Q100 Hex inverting Schmitt trigger 21. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 17 18 19 19.1 19.2 19.3 19.4 20 21 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . .