Datasheet
1. General description
The 74HC373; 74HCT373 is a high-speed Si-gate CMOS device and is pin compatible
with Low-power Schottky TTL. It is specified in compliance with JEDEC standard no. 7A.
The 74HC373; 74HCT373 is an octal D-type transparent latch featuring separate D-type
inputs for each latch and 3-state outputs for bus oriented applications. A latch enable (LE)
input and an output enable (OE
) input are common to all latches.
The 74HC373; 74HCT373 consists of eight D-type transparent latches with 3-state true
outputs. When LE is HIGH, data at the Dn inputs enters the latches. In this condition the
latches are transparent, i.e. a latch output will change state each time its corresponding
D input changes.
When LE is LOW the latches store the information that was present at the D inputs a
set-up time preceding the HIGH-to-LOW transition of LE. When OE
is LOW, the contents
of the 8 latches are available at the outputs. When OE
is HIGH, the outputs go to the high-
impedance OFF-state. Operation of the OE
input does not affect the state of the latches.
The 74HC373; 74HCT373 is functionally identical to:
• 74HC563; 74HCT563: but inverted outputs and different pin arrangement
• 74HC573; 74HCT573: but different pin arrangement
2. Features and benefits
3-state non-inverting outputs for bus oriented applications
Common 3-state output enable input
Functionally identical to the 74HC563; 74HCT563 and 74HC573; 74HCT573
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Specified from 40 Cto+85C and from 40 Cto+125C
74HC373; 74HCT373
Octal D-type transparent latch; 3-state
Rev. 5 — 13 December 2011 Product data sheet