Datasheet

74HC_HCT377 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 3 — 25 September 2013 5 of 19
NXP Semiconductors
74HC377; 74HCT377
Octal D-type flip-flop with data enable; positive-edge trigger
7. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For DIP20 package: above 70 C the value of P
tot
derates linearly with 12 mW/K.
[3] For SO20 package: above 70 C the value of P
tot
derates linearly with 8 mW/K.
For SSOP20 and TSSOP20 packages: above 60 C the value of P
tot
derates linearly with 5.5 mW/K.
8. Recommended operating conditions
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V)
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.5 +7 V
I
IK
input clamping current V
I
< 0.5 V or V
I
>V
CC
+0.5V
[1]
- 20 mA
I
OK
output clamping current V
O
< 0.5 V or V
O
>V
CC
+0.5V
[1]
- 20 mA
I
O
output current 0.5 V < V
O
< V
CC
+0.5V - 25 mA
I
CC
supply current - 50 mA
I
GND
ground current 50 - mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation T
amb
= 40 C to +125 C
DIP20 package
[2]
- 750 mW
SO20, SSOP20, TSSOP20
[3]
- 500 mW
Table 5. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V)
Symbol Parameter Conditions 74HC377 74HCT377 Unit
Min Typ Max Min Typ Max
V
CC
supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V
V
I
input voltage 0 - V
CC
0-V
CC
V
V
O
output voltage 0 - V
CC
0-V
CC
V
T
amb
ambient temperature 40 - +125 40 - +125 C
t/V input transition rise and fall rate V
CC
= 2.0 V - - 625 - - - ns/V
V
CC
= 4.5 V - 1.67 139 - 1.67 139 ns/V
V
CC
= 6.0 V - - 83 - - - ns/V