Datasheet
1. General description
The 74LVC1G80 provides a single positive-edge triggered D-type flip-flop.
Information on the data input is transferred to the Q
output on the LOW-to-HIGH transition
of the clock pulse. The input pin D must be stable one set-up time prior to the
LOW-to-HIGH clock transition for predictable operation.
Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this
device in a mixed 3.3 V and 5 V environment.
This device is fully specified for partial power-down applications using I
OFF
. The I
OFF
circuitry disables the output, preventing the damaging backflow current through the device
when it is powered down.
2. Features and benefits
Wide supply voltage range from 1.65 V to 5.5 V
High noise immunity
Complies with JEDEC standard:
JESD8-7 (1.65 V to 1.95 V)
JESD8-5 (2.3 V to 2.7 V)
JESD8B/JESD36 (2.7 V to 3.6 V)
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
24 mA output drive (V
CC
=3.0V)
CMOS low power consumption
Latch-up performance exceeds 250 mA
Direct interface with TTL levels
Inputs accept voltages up to 5 V
Multiple package options
Specified from 40 Cto+85C and 40 Cto+125C.
74LVC1G80
Single D-type flip-flop; positive-edge trigger
Rev. 12 — 2 July 2012 Product data sheet