Datasheet

74LVC2G07 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 7 — 4 July 2012 4 of 18
NXP Semiconductors
74LVC2G07
Buffers with open-drain outputs
8. Limiting values
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] When V
CC
= 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
[3] For SC-88 and SC-74 packages: above 87.5 C the value of P
tot
derates linearly with 4.0 mW/K.
For XSON6 packages: above 118 C the value of P
tot
derates linearly with 7.8 mW/K.
9. Recommended operating conditions
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.5 +6.5 V
I
IK
input clamping current V
I
<0V 50 - mA
V
I
input voltage
[1]
0.5 +6.5 V
I
OK
output clamping current V
O
<0V 50 - mA
V
O
output voltage Active mode
[1]
0.5 +6.5 V
Power-down mode
[1][2]
0.5 +6.5 V
I
O
output current V
O
=0V to6.5V - 50 mA
I
CC
supply current - 100 mA
I
GND
ground current 100 - mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation T
amb
= 40 C to +125 C
[3]
- 250 mW
Table 6. Recommended operating conditions
Symbol Parameter Conditions Min Typ Max Unit
V
CC
supply voltage 1.65 - 5.5 V
V
I
input voltage 0 - 5.5 V
V
O
output voltage Active mode 0 - 5.5 V
Power-down mode; V
CC
=0V 0 - 5.5 V
T
amb
ambient temperature 40 - +125 C
t/V input transition rise and
fall rate
V
CC
= 1.65 V to 2.7 V - - 20 ns/V
V
CC
= 2.7 V to 5.5 V - - 10 ns/V