Datasheet

74LVC2G74 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 10 — 2 April 2013 2 of 25
NXP Semiconductors
74LVC2G74
Single D-type flip-flop with set and reset; positive edge trigger
3. Ordering information
4. Marking
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74LVC2G74DP 40 C to +125 C TSSOP8 plastic thin shrink small outline package; 8 leads; body
width 3 mm; lead length 0.5 mm
SOT505-2
74LVC2G74DC 40 C to +125 C VSSOP8 plastic very thin shrink small outline package; 8 leads;
body width 2.3 mm
SOT765-1
74LVC2G74GT 40 C to +125 C XSON8 plastic extremely thin small outline package; no leads;
8 terminals; body 1  1.95  0.5 mm
SOT833-1
74LVC2G74GF 40 C to +125 C XSON8 extremely thin small outline package; no leads;
8 terminals; body 1.35  1  0.5 mm
SOT1089
74LVC2G74GD 40 C to +125 C XSON8 plastic extremely thin small outline package; no leads;
8 terminals; body 3  2  0.5 mm
SOT996-2
74LVC2G74GM 40 C to +125 C XQFN8 plastic, extremely thin quad flat package; no leads;
8 terminals; body 1.6  1.6  0.5 mm
SOT902-2
74LVC2G74GN 40 C to +125 C XSON8 extremely thin small outline package; no leads;
8 terminals; body 1.2  1.0  0.35 mm
SOT1116
74LVC2G74GS 40 C to +125 C XSON8 extremely thin small outline package; no leads;
8 terminals; body 1.35  1.0  0.35 mm
SOT1203
Table 2. Marking codes
Type number Marking code
[1]
74LVC2G74DP V74
74LVC2G74DC V74
74LVC2G74GT V74
74LVC2G74GF Y4
74LVC2G74GD V74
74LVC2G74GM V74
74LVC2G74GN Y4
74LVC2G74GS Y4