INTEGRATED CIRCUITS 74LVT08 3.
Philips Semiconductors Product specification 3.3V Quad 2-input AND gate 74LVT08 QUICK REFERENCE DATA SYMBOL TEST CONDITIONS Tamb = 25°C; GND = 0V PARAMETER TYPICAL UNIT 3.0 3.4 ns tPLH tPHL Propagation delay An or Bn to Yn CL = 50pF; VCC = 3.3V CIN Input capacitance VI = 0V or 3.0V 4 pF ICCL Total supply current Outputs Low; VCC = 3.6V 1 mA ORDERING INFORMATION PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG.
Philips Semiconductors Product specification 3.3V Quad 2-input AND gate 74LVT08 FUNCTION TABLE INPUTS OUTPUT Dna Dnb L L Qn L L H L H L L H H NOTES: H = High voltage level L = Low voltage level H ABSOLUTE MAXIMUM RATINGS1, 2 SYMBOL VCC PARAMETER CONDITIONS DC supply voltage IIK DC input diode current VI DC input voltage3 IOK DC output diode current VOUT DC output voltage3 IOUT DC output current Tstg Storage temperature range RATING UNIT –0.5 to +4.
Philips Semiconductors Product specification 3.3V Quad 2-input AND gate 74LVT08 DC ELECTRICAL CHARACTERISTICS Over recommended operating conditions Voltages are referenced to GND (ground = 0V) LIMITS PARAMETER SYMBOL TEST CONDITIONS Temp = -40°C to +85°C MIN VIK Input clamp voltage High-level output voltage VOL Low-level output voltage II Input leakage current IOFF Output off current ICCH Quiescent supply current –1.2 V VCC–0.2 VCC = 2.7V; IOH = –6mA 2.4 VCC = 3.0V; IOH = –20mA 2.
Philips Semiconductors Product specification 3.3V Quad 2-input AND gate 74LVT08 TEST CIRCUIT AND WAVEFORMS VCC 10% 0V tTHL (tF) D.U.T. RT CL AMP (V) VM 10% VOUT PULSE GENERATOR 90% VM NEGATIVE PULSE VIN tW 90% tTLH (tR) tTLH (tR) RL tTHL (tF) 90% POSITIVE PULSE Test Circuit for Outputs AMP (V) 90% VM VM 10% 10% tW 0V VM = 1.5V Input Pulse Definition INPUT PULSE REQUIREMENTS DEFINITIONS FAMILY RL = Load resistor; see AC CHARACTERISTICS for value.
Philips Semiconductors Product specification 3.3V Quad 2-input AND gate 74LVT08 SO14: plastic small outline package; 14 leads; body width 3.
Philips Semiconductors Product specification 3.3V Quad 2-input AND gate 74LVT08 SSOP14: plastic shrink small outline package; 14 leads; body width 5.
Philips Semiconductors Product specification 3.3V Quad 2-input AND gate 74LVT08 TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.
Philips Semiconductors Product specification 3.
Philips Semiconductors Product specification 3.3V Quad 2-input AND gate 74LVT08 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Formative or in Design This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. Preliminary Specification Preproduction Product This data sheet contains preliminary data, and supplementary data will be published at a later date.