Datasheet

NXP Semiconductors
AN11116
Using the RS232 serial evaluation boards on a USB port
AN11116
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2012. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.1 — 1 August 2012
215111
6 of 8
In the advanced settings for the COM port, select the detailed settings as below:
Fig 3. Advanced COM settings
Receive bytes: 64
Transmit bytes: 320
Latency timer: 4ms
After applying these settings, close all windows. The USB to RS232 interface is now
ready for use.