Information

NXP Semiconductors
AN11022
CLRC663 Quickstart Guide
Example for using the load protocol with the CLRC663 PcSerial.3.6.exe.:
CLL
CHB 115200
Terminate any running command. Flush_FiFo
SR 00 00
SR 02 b0
// Clear all IRQ 0,1 flags
SR 06 7f
SR 07 7f
//> Write in Fifo: Tx and Rx protocol numbers(0,0)
GR 04
SR 05 04 // Rx protocol=0
SR 05 04 // Tx prot=0
// Enable IRQ0 interrupt sources
//
// Idle interrupt(Command terminated), RC663_BIT_IDLEIRQ=0x10
GR 08
SR 08 10
// Enable Global IRQ propagation.
GR 09
SR 09 40
//> Start RC663 command "Load Protocol"=0x0d
SR 00 0D
::: L_LoadProtocol
GR 07
JNM IOR 40 40 L_LoadProtocol
// Disable Irq 0,1 sources
SR 08 00
AN11022 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2015. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.2 — 14 January 2015
205912
27 of 45