Information

NXP Semiconductors
AN11022
CLRC663 Quickstart Guide
8. List of tables
Table 1. Connection Scheme for detecting the different
Interface Types ................................................. 5
Table 2. Crystal requirements recommendations ........... 6
Table 3. PCB sections .................................................... 8
Table 4. Used devices for RS232 interface ................... 12
Table 5. DSUB-9 Pinning for RS232 ............................. 13
Table 6. Used devices for RC663 Schematic including
oscillator .......................................................... 15
Table 7. Used devices for RC663 Schematic including
oscillator .......................................................... 17
Table 8. Antenna section connector.............................. 25
Table 9. RxCtrl_Reg register (address 35h); reset value:
04h .................................................................. 25
Table 10. Predefined protocol overview .......................... 26
Table 11. Register settings Type A ID2 sized antenna ... 29
Table 12. Register settings Type B ID2 sized antenna ... 30
Table 13. Register settings Type B ID3 sized antenna ... 31
Table 14. Register settings FeliCa ID1 sized antenna .... 32
Table 15. Register settings FeliCa ID2 sized antenna .... 33
Table 16. Register settings FeliCa ID3 sized antenna .... 34
Table 17. Register settings I-Code ID1 sized antenna .... 35
Table 18. Register settings I-Code ID2 sized antenna .... 36
Table 19. Register settings I-Code ID3 sized antenna .... 37
Table 20. ISO18000-3 Mode3 ID1 sized antenna ........... 38
Table 21. ISO18000-3 Mode3 ID2 sized antenna ........... 39
Table 22. ISO18000-3 Mode3 ID3 sized antenna ........... 40
AN11022 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2015. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.2 — 14 January 2015
205912
44 of 45