Datasheet

LPC1102_1104 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 7 — 26 September 2013 31 of 43
NXP Semiconductors
LPC1102/1104
32-bit ARM Cortex-M0 microcontroller
10.4 Internal oscillators
[1] Parameters are valid over operating temperature range unless otherwise specified.
[2] Typical ratings are not guaranteed. The values listed are at room temperature (25 C), nominal supply
voltages.
[1] Typical ratings are not guaranteed. The values listed are at room temperature (25 C), nominal supply
voltages.
[2] The typical frequency spread over processing and temperature (T
amb
= 40 C to +85 C) is 40 %.
[3] See user manual UM10429.
Table 11. Dynamic characteristic: internal oscillators
T
amb
=  40  C to +85  C; 2.7 V  V
DD
 3.6 V.
[1]
Symbol Parameter Conditions Min Typ
[2]
Max Unit
f
osc(RC)
internal RC oscillator frequency - 11.88 12 12.12 MHz
Conditions: Frequency values are typical values. 12 MHz  1 % accuracy is guaranteed for
2.7 V  V
DD
 3.6 V and T
amb
= 40 C to +85 C. Variations between parts may cause the IRC to
fall outside the 12 MHz  1 % accuracy specification for voltages below 2.7 V.
Fig 17. Internal RC oscillator frequency versus temperature
Table 12. Dynamic characteristics: Watchdog oscillator
Symbol Parameter Conditions Min Typ
[1]
Max Unit
f
osc(int)
internal oscillator
frequency
DIVSEL = 0x1F, FREQSEL = 0x1
in the WDTOSCCTRL register;
[2][3]
-9.4 - kHz
DIVSEL = 0x00, FREQSEL = 0xF
in the WDTOSCCTRL register
[2][3]
- 2300 - kHz
002aaf403
11.95
12.05
12.15
f
(MHz)
11.85
temperature (°C)
−40 853510 60−15
VDD = 3.6 V
3.3 V
3.0 V
2.7 V
2.4 V
2.0 V