Datasheet

LPC111X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 9.2 — 26 March 2014 122 of 127
NXP Semiconductors
LPC1110/11/12/13/14/15
32-bit ARM Cortex-M0 microcontroller
Modifications: BOD level 0 for reset added in Table 15.
LPC111X v.7.4 20120730 Product data sheet - LPC111X v.7.3
Modifications:
• Function SSEL1 added to pin PIO2_0 in Figure 6 “LPC1100XL series pin configuration
HVQFN33” and Table 11 “LPC1100XL series: LPC1111/12/13/14 pin description table
(HVQFN33 package)”.
• BOD level 0 for reset and interrupt removed.
LPC111X v.7.3 20120706 Product data sheet - LPC111X v.7.2
Modifications:
• Corrected pinout for part LPC1112FHN24/202. Pin XTALOUT replaced by V
DD
. See
Table 6 and Figure 10.
LPC111X v.7.2 20120604 Product data sheet - LPC111X v.7.1
Modifications:
• For parameters I
OL
, V
OL
, I
OH
, V
OH
, changed conditions to 1.8 V  V
DD
< 2.5 V and 2.5
V  V
DD
 3.6 V in Table 13).
• Capture-clear feature added to general-purpose counter/timers (see Section 7.12;
LPC1100XL series only).
• Figure 47 updated for parts with configurable open-drain mode.
• Added Section 9.5 “CoreMark data”
• Added LPC1100L series part (LPC1112FHN24/202).
• WDOSc frequency range corrected.
LPC111X v.7.1 20120401 Product data sheet - LPC111X v.7
Modifications:
• Added HVQFN33 (5x5) reflow soldering information.
LPC111X v.7 20120301 Product data sheet - LPC1110_11_12_13_14 v.6
Modifications:
• LPC1100XL series parts added (LPC1111FHN33/103, LPC1111FHN33/203,
LPC1112FHN33/103, LPC1112FHN33/203, LPC1112FHI33/203, LPC1113FBD48/303,
LPC1113FHN33/203, LPC1113FHN33/303, LPC1114FBD48/303,
LPC1114FHN33/203, LPC1114FHN33/303, LPC1114FHI33/303, LPC1114FBD48/323,
LPC1114FBD48/333, LPC1114FHN33/333, LPC1115FBD48/303).
LPC1110_11_12_13_14 v.6 20111102 Product data sheet - LPC1111_12_13_14 v.5
Modifications:
• Parts LPC1112FHI33/202 and LPC1114FHI33/302 added.
• Parts LPC1112FDH28/102, LPC1114FDH28/102, LPC1114FN28/102,
LPC1112FDH20/102, LPC1110FD20, LPC1111FDH20/002, LPC1112FD20/102 added.
LPC1111_12_13_14 v.5 20110622 Product data sheet - LPC1111_12_13_14 v.4
Modifications:
• ADC sampling frequency corrected in Table 7 (Table note 7).
• Pull-up level specified in Table 3 to Table 4 and Section 7.7.1.
• Parameter T
cy(clk)
corrected on Table 17.
• WWDT for parts LPC111x/102/202/302 added in Section 2 and Section 7.15.
• Programmable open-drain mode for parts LPC111x/102/202/302 added in Section 2
and Section 7.12.
• Condition for parameter T
stg
in Table 5 updated.
• Table note 4 of Table 5 updated.
• Section 13 added.
• Removed PLCC44 package information.
LPC1111_12_13_14 v.4 20110210 Product data sheet - LPC1111_12_13_14 v.3
Table 34. Revision history
…continued
Document ID Release date Data sheet status Change notice Supersedes